-
Shutting down e.g. port 80 on cloud connected access point (NWA55AXE)
I have looked around in Nebula, and in the "direct login" for the AP, but can not find anywhere where i can do stuff like shutting down port 80. Should this be possible?
-
On Nebula Control Center the information is incorrect.
Hi, currently my business has 4 zyxel switches. 2 regular switches and 2 PoE switches for phones etc. We have around 30-40 devices (PCs, Phones, Printers) connected to the switches through internal wiring. All the devices are working without any issue. However, on the Nebula Control Center website, it says nothing is…
-
direct login for NWA55AXE (access point) that is cloud connected
Hi! We have a NWA55AXE that was set up with the nebula app. Works fine. But where do i see/set the user/pass for logging in directly to it? I mean, when going to its http://IP:80? I have tried admin/1234, and the cloud login, and admin/admin and such, but none works. Thanks!
-
My configured devices are not shown in Nebula cloud
I configured USG Flex 200 devices in the nebula cloud but now the devices are not showing and unable to access them.
-
Firmware Update fails -> missing domain
When trying to update the Firmware of APs and switches, it always fails. All domains mentioned in Nebula (https://nebula.zyxel.com/cc/ui/index.html#/help/firewall-information) are opened but it tried to connect to some different addresses. I figured out, for updating the firmare, another (sub)domain is being requested:…
-
Nebula down?????
I can't get in for the last 20 minutes
-
NWA50AX won't update
Hi I have just started using the Zyxel access points at the min. I have 6 APs setup fine, 4 or wired in and 2 are via the mesh setup. However I'm struggling to add my last 2 APs. I'm doing the same steps to add them, both are showing in the Nebula control centre, but both are also saying they are offline with "not up to…
-
PPPoE credentials bug ?
Hi everyone, I'm facing a strange situation with Nebula on a 3 sites organization that I have set up about 1 year ago. It was a completely new installation. The organization has 3 sites with VDSL2 modem set up in bridge mode. Nebula configuration had been set up before the physical installation on-site (3 x USG Flex 100).…
-
Pin Client to specific Access Point
Is it possible to pin clients to a specific access point? My scenario: I've got two NWA50AX, one is connected to the switch and the other one is acting as repeater. Both APs are serving the same SSID. Now, some clients are connected to the repeater, because of the better signal. But (for some reasons) they should better…
-
NWA50AX Repeater/Range Extender (Smart Mesh?)
Hi there, I've two NWA50AX to span WLAN in an Apartment. One NWA50AX is directly connected to the switch. The other one is currently connected by power lan, which is very unstable. These constellation results from my old setup with two TP-Link AP's. Both access points serve 4 SSID from separate VLANS. Now, with the new…
-
How to apply hotfix to NSG50
I have downloaded and unzipped NSG50 hotfix file 1.33(ABHP.4)CO. I am logged into Nebulus Control Center/sitewide/firmware management. NSG50 is indicated as up to date. How to add hotfix?
-
WAX510D Access Point goes offline several times
Hi all. I have a couple of WAX510D Access Point, directly connected by cable to a GS1920-24HP switch. Both of them were correctly working till yesterday, when just one of them went offline without any network operation (i.e. upgrade). The offline AP were unplugged, plugged back and then reset several times. After reboot,…
-
Confused about functionality of Nebula after the one month of 'free' access runs out.
Will I have any AP adjustments through the 'Zyxel dashboard' page because as it stands this dashboard page has no way of making adjustments to my NWA210AX? So how would I make adjustments after the one month of 'free' access expires on my Nebula firmware page?
-
[Nebula Mobile App] Watch a video and find out how to manage your network anytime, anywhere!
Zyxel Nebula Mobile App is a powerful tool for you to manage and troubleshoot your network anytime, anywhere. You can register a device, check your network status, manage access control, or even troubleshoot all in the palm of your hand. Watch this video and find out more:https://www.youtube.com/watch?v=cSyD29ErI24
-
Zyxel NWA50AX NCC Invalid license
I just bought an access point and I am trying to configure it with Nebula. After the installation, I got the message that the NCC license is invalid. I bought a one year license and it's not working because it seems that I have a trial. I am stuck, I cannot do anything. Can you help?
-
[NEBULA] how can connect GS1920-8HP to NCC
Cloude LED flashing brown.
-
Split tunnel VPN doesn't seem to work (SecuExtender and USG Flex Firewall)
The customer has Cloud Authentication Setup using default settings (Remote access VPN)) available for the USG FLEX 200 FW. Some 20 SecuExtender licenses. They do use MFA (Google Authenticator). The split tunnel doesn't work imo. What ever I do to the SecuExtender Client the laptop will always result having the public IP of…
-
What's New in Nebula P14 Release?
We recently released the latest Nebula P14
update on April, 11th, 2022. We can say this version is all about “USER EXPERIENCE,” making the NCC SMARTER, FASTER, and BETTER than
before. Faster
Speed In this release, you’ll find out the data
loading time is much faster than before as we’ve made a significant improvement
on…
-
nebula app to nr5101
just installed app on my iPhone. try to add device both QR code and manual doesn't work, what is wrong?
-
CNP Trial Survey - Lucky Draw Prize Winners
Hi all, We've recently conducted a lottery draw with our users who have participated in the CNP AP security survey. And, this is what you all have been waiting for - the winner list: Congratulations to all the winners and thank you for your support!
