-
Fan/system error, room to cold?
Hello, i have a NAS520 in my cellar, it has about 16 degrees. It shuts down every saturday morning at 4:30 with internal schedule that i have setup. This works for months, but since a few weeks it dont work anymore. The NAS stays in an unreachable status. The System LED is blinking endless and no reaction via http/ssh or…
-
NAS 326 Gigabit connection failure
I have Zyxel NAS326 and when i connect it to the LAN port, it tries to connect at a Gigabit speed but it failures... and then connects at 100mbps speed through auto negotiation. Do you know what might be fault ?? I have the latest firmware update and i use Cat6 lan cables. #NAS_January
-
NAS540 - Wechsel der "Systemplatte" möglich?
Hallo, ich habe mein Zyxel NAS540 zunächst mit einer kleineren HDD bestückt, lediglich 250GB. Ich würde diese nun gerne durch eine größere ersetzen. Allerdings scheint dies die "Systemplatte" (?) zu sein, denn dort wurden alle nachträglich installierten Zusatzpakete wie Tweaks etc. unter der Freigabe "admin" installiert;…
-
NAS326 Photo Streaming to TV via Bluray player
Hi all with the NAS326 I am trying to stream photos to a Samsung Bluray player them on to a TV. The bluray can see the NAS326 via the network and I can navigate to the photo folders OK . The problem I have is the time it takes for the image thumbnails to be generated and selected for playing on the TV. A folder with say…
-
NAS326 MAC and Windows Files
Good morning I would need to use the NAS to save indifferentemnte files in MAC and Windows format. I ask you if this is possible. Thank you #NAS_January
-
NAS326 Backup Planner Jobs. Where are they?
I've had to factory reset the NAS326. Backup 'Jobs' made by the 'Backup Planner' app are not available after the reset. (the backup files themselves are still there but the 'Jobs' which keeps track of those files are missing.) Where does the NAS326 keep these 'Jobs' so they can be brought back after the factory reset?…
-
Newbie Help - DyDNS Enable in NAS326 or in the Router or both
I am new to setting up my own NAS and am slowly learning. I have decided to use noip as my DyDNS service provider. My question is, do I enable DyDNS in my NAS326, my router or in both? I understand that you must enable it in your router so that your router points traffic to your NAS but I am confused if it also needs to be…
-
My NAS326 does not appear on the Windows10 File Manager
NAS326 does not appear under 'Network' in the File Manager except as a media device and a Wonky handler, but not under 'Computer'. Under 'This PC' it appears under 'Network Locations', but when I double click, only the Music and Video folders appear, the Admin and Photos folder are not there. When I log into the NAS itself…
-
Solved - NAS540 - Möglichkeit das NAS540 als NUT-Client einzurichten?
Hallo, ich betreibe eine USV von APC, welche mittels USB-Kabel einem anderen NAS den aktuellen Status der USV mitteilt. Das andere NAS ist als NUT-Master eingerichtet. Ein Linux- und ein Windowsrechner laufen als NUT- bzw. WinNUT-Client. Gibt es eine Möglichkeit auch das NAS540 im NUT-Clientmodus einzurichten bzw. zu…
-
Altes Time Machine Backup loswerden
Hallo zusammen, ich habe auf meinen NAS (Zyxel NSA310S) ein altes Time Machine Backup liegen, das nicht mehr benötigt wird. Ich kann das sparsebundle aber weder mit dem Finder, noch mit Windows Explorer noch mit dem Webinterface des NAS löschen, da angeblich Rechte fehlen.Leider habe ich meinem jugendlichen Leichtsinn das…
-
cann't find my nas540 on my network
After a powerlost I cann't find my nas540 on my home network. I used nas seeker and I did a hard reset (factory reset), but my NAS is still missing. #NAS_January
-
NAS326 - Download of the list failed
I have a problem whenever I trying to load the list the fault message displayed. Due to this fact it is impossible to use the cloud. Could you help me? #NAS_December
-
nas 326 zcloud and app center issues
i ve just bought my nas 326 with a wd red 4 tb. im not able to get my device paired on z cloud (it is not found on network). at the same time when i try to download apps from app center it Always fails. could you kindly help me? thx and regards claudio #NAS_January
-
[Errno 28] No space left on device
I'm getting [Errno 28] No space left on device<br> error messages when trying to copy to my ZyXel NAS540. To me, it looks like there is space available, ~ $ df
Filesystem 1K-blocks Used Available Use% Mounted on
ubi7:ubi_rootfs2 92892 51160 36952 58% /firmware/mnt/nand
/dev/md0 1966352 192368 1674096 10%…
-
Disk group necessary?
I recently purchased a Nas542 and want to draft the layout of volumes and disks. Unfortunately, Zyxel's manual is very short on explanations, to say it nicely. Since changes often require a reformat, it would be good to get the layout right, in the first place. I have two (now completely empty) 6TB disks and want them as…
-
NAS326 and Windows Explorer
I want my NAS326 to show up just a like regular hard drive does so I can see and access it using Windows Explorer. Can this be done? I don't want access from the internet/remotely or to use any of the applications. I also don't want to use a browser based application for access. I just want a shared drive for two computers…
-
Missing Nas542 Icon/connection under Network. Wtd?
I have this problem: As of yesterday, i cant get an icon to show up under Network, besides the icon computer. Its Windows 10 Pro. Im talking about File Explorer. Its ALWAYS the nr1 way to copy and paste and delete files and folders on my Nas542. BUT yesterday, the icons is gone, and navigation and copying and pasting and…
-
How to solve Dropbox problem with deleted NAStoken NSA320
Hi all, My dropbox sync stopped working after I deleted old files from the zDownload folder a little too enthusiastically. When googling how to solve this problem I can only find the warning not to delete the NAStoken. Is there a way to generate a new NAStoken? #NAS_September
-
How keep hard drives in NAS truly independent ("True" JBOD)?
Hello everyone! Here comes a question that I am
surprised to not have found an answer to anywhere – or at least
more interest in... I would like to be able to put a new
hard drive in my NAS326, to manually copy data from the hard drive that
is already there (Which is in basic “RAID”) and then remove it,
without the data on…
-
Syslog-ng uses 40-50% processor power continuously. Can not start FTP service.
My NAS520 have issues after V5.21(AASZ.0) update. I noticed that the "syslog-ng" process takes 40-50% of processor power continuosly. At the same time, I noticed that the FTP service had stopped. I try to start it, but in LOG i can only read: "build-in-service | notice | FTP server stops". Please suggest what I could do…