-
NSA320s - Upgrading the SMB protocol support
Hi, I have an NSA320s. I've been a long time linux user and recently I discovered that in Ubuntu, which I'm mainly usin the SMB1.0 support was disabled in the latest kernels (I do understand why). Is there a safe way to update the NSA320s firmware to support a newer SMB protocol?
-
Install SMB V2 on NSA325
Hi, I've seen some posts regarding this natively supporting only SMB V1 so unable to be used in Windows 10 environments without compromising security. I was hoping somebody could take me through the steps of installing a later version of Samba from say, the Entware Package Repository. I'm not a Linux guru but know some of…
-
NAS316 - No HDD Spin Down
Hi, I have a NAS326 with 2 WD Red inside. The HDDs do not go to sleep (HDD LEDs always on) and are running 24/7, even if the NAS is not in use. This is poor for HDD lifetime and for energy consumption. The NAS does also not set the HDDs to sleep, if network cable is disconnected. Cloud thumbnail generation and cloud are…
-
Firmware Upgrade Versions
I have a NAS326. In System ¦ Firmware Upgrade I see I am currently V5.21(AAZF.10) ¦ 2019/07/14 22:46:33 ¦ "The firmware version is up-to-date", but in the Zyxel Download Section I see there are several after my version, the latest being V5.21(AAZF.14)C0. Can I download just this version and install it or should I go…
-
never read/write access to NAS326
I my NAS326 (S220Y03109061) fw: V5.2(AAZF.14) does not allow read/write access contrary to what is indicated in the NAS Series User's Guide at Chapter 7 Control Panel: Privilege and Sharing; Why? PinoM
-
Zyxel Drive Stays Stuck
Hello I have a NAS542 device. I have set my device and cloud settings correctly. When I want to use the Zyxel Drive application, it connects to the device, but when I want to enter the folder or within the folder, it keeps saying it is loading. It times out. Anyone experiencing this problem? Does anyone have a solution…
-
NAS 326 Cron Job, Script?
Hallo, kann man bei der NAS326 ein Script erstellen und ausführen, welches automatisch Dateien älter als X Tage löscht? Ich nutze die NAS als FTP Freigabe einer Überwachungsanlage und dort kommen in kurzer Zeit sehr viele Bilder zustande. Derzeit lösche ich sie händisch über WinSCP und es wäre sehr hilfreich, wenn die NAS…
-
Nas 542 upgrade firmware easy NFS config etc
Hey, my nas542 is unconistent with how it perform. And i prefer nfs as that is fastest over my network it seems but this nas need a app or addon to even run NFS and to configure it its like a hit and miss for what thats work or not. I wanna just share each hdd over my network no privacy, no privat access or whatever as i…
-
Posting lost in moderation?
Dear all - a couple of days ago I have posted a request for help to this section of the forum. After two subsequent corrections of spelling mistakes this posting disappeared into moderation and has not yet surfaced again. As I did not manage to find anyone who would possibly appear to be officially responsible for this…
-
NAS540
Hello, after updating my MAS 540 the NAS starter utiility is unable to find the NAS, I do however see it in my pc but am unable to copy files to the drives, what am I doing wrong?
-
Zyxel NSA310S can't create directorys
Hello I've tried to be the local admin with the full rights. I can create within browser but when I connect via Filezilla FTP, it is saying 550 Can't create directory: No such file or directory. I'm trying to create a new folder into / (root). This makes me crazy, my Reolink IP camera won't save footage there too because…
-
Expanding a volume taking "forever"?
Hi, all, I upgraded my NAS326 from 3TB drives to 8TB drives, and the individual steps worked (though a long time) until it came to expanding the volumes from 3TB to 8TB. When I hit the "Manage" button and selected the expand option, it starts and never seems to end. It took about 7.5 hours each to move data to each of the…
-
Zyxel NSA 320 being able to choose which samba version to use
I have a Zyxel NSA320 working with SMBv2, which I followed the enabling 3rd party repository procedure, install the Entware-ng zyxel-samba-replacement package, opkg update, opkg install zyxel-samba-replacement, etc... Everything has been working correctly for a long time, and without any problems. However, I wanted to…
-
NAS326 - permanently disable beeps?
Is there a way to permanently disable beeps that survives a restart? I recently discovered that my RAID was degraded, beeping constantly, and without me there to login and disable it via the interface, the piercing noise drives everyone else in the house absolutely BONKERS!
-
missing nas 326 widgets in web interface
I have one zyxel nas 326 for some time (maybe 2 or more years). Some time ago, in web interface, i have noticed missing "widget" icons (application icons in the bottom bar like online users or disk stage etc). I tried reinstall it but with no success. The icons were not restored even after the firmware update. NAS works…
-
NAS540
nas540 won't connect to network after latest update, even after resetting the NAS Starter utility is unable to find the NAS540
-
NAS542: HDD issues, but RAID status "healthy"
Hi, I'm having some issues with my RAID on NAS542, 4x8TB (ST8000DM004). The problem: Disk 2 is likely degraded, but still running. I would like to ask for some assistance resolving it. Details: I noticed that when I login to mycloud.zyxel.me, the NAS status shows "RAID statusWarning", while the used disk space on one of…
-
NAS326 access problem due to services stopping automatically
Hi everyone. I have a NAS326 with the most recent updates. It is on a small home network with a static ip. I have setup https and webdav access and all run nicely when they do and I am able to access the web gui, files etc from the WAN with no problems. However, these services automatically stop at random intervals,…
-
NAS542 Uploadmanger to ftp with Privatekey
Hell Community. I'm looking for a posibilty to upload Files via the uploadmanger to an sftp Server. The server is set so that login is only possible with an SSL key. I have disabled login via password for security reasons. As far as I know, a .ssh directory is usually created in the respective user's home directory. Is…
-
The file is not editable (NAS326)
Hello. I have Zyxel NAS326 installed and the following problem arises: when a file is opened on the computer and for some reason it reboots, it is impossible to open this file for editing. Windows displays a message that the file is occupied by a user (writes my username), and does not allow editing until you reboot…
