-
Send Magic Packet to Wake a Computer from a NAS326
Sorry for my english... I have installed ffp and i can not find an option to send a magic packet to wake a computer in the home network. I want to SSH to the NAS and send the magic packet from it, because my router loses the arp table when i shotdown the computer. Is there a way to do this?
-
One folder completely disappeared after reset!
Hi! I have hard reseted my NAS 326 recently, and when I logged back in, one of my folders just disappeared. No trace of it on the device whatsoever. Note, that this wasn't one of the default folders, like "Music, Video, Photo", it was a separate folder, created by me on the same folder level where those defaults are. Where…
-
Impossible network drive connection, but pinged NAS.
Hello everyone, I am facing a connection problem with my NAS, that seems to be impossible to solve. The network can be pinged from the nas326. I would like to mount the admin-1 folder. This config is set for it: The folder is categorised to normal: I can reach my files on the file browser of nas326 In the NSU the NAS…
-
NAS 542 unable to login via admin
As mentioned above im unable to login via admin and default 1234 Password after Resetting the device several times. Neither resetting it to 1 nor 2 beeps has have any effect. Login attempts via NAS Starter or Web (on different browsers) result in a "Wrong User or Password" failure message. Accessing the Files in shared…
-
remove checkmate ransomware
Dear Team, If there is someone with the solution, please help. My files stored in NAS 540 have been encrypted by checkmate; I am unable to open the files.
-
NSA325v2 backup
I have a NSA310 which I woild like to use for backup as I have a spare 4TB drive. Is it possible to rsyNc to the NSA310 ?
-
Where is gone the twonky media server ?
hello, on my nas 542, the twonky server has disappeared. I think but I'm not sure if it's due to the firmware update. Can you confirm me the deletion of Twonky or is it a bug?
-
NSA310 - eSata disk status is DOWN
Hello,I have a NSA310 with 2TB internal HDD and 4TB external HDD connected to esata.After a power failure, the external disk status was changed to Down and it is not shared anymore (the internal HDD is working).The S.M.A.R.T status shows no errors.I tried to fix it via the admin web UI, but "Scan Volume" returns a "Failed…
-
NSA325-v2
Hi I tryed to activate LMS (Logitech Media Server), first I try to install PHP and MYSQL. nither of the instals works, they just show 5% instaled and then a red dot. I found some instruktions to make a manuel download for ?zy-pkgs?, but this is not found anyware. there was at topic like this in oktober '21. did Zyxel stop…
-
NAS542 accessible though web GUI but not through Windows Explorer
Hello all, bit of a weird problem here. I can access my NAS542 through web GUI and I can also upload/download files to it via GUI File Browser. But, I can't access it through Windows Explorer. I navigate to Network, but NAS542 just... isn't there. No matter how many times I tried, on various computers connected to my home…
-
NAS542 .How to automatic synchronization mobile to zyxel nas server ?
How can I backup the photos and videos on my mobile phone to the NAS542 storage?Manual saving is not the goal!I mean automatic saving, automatic synchronization!The Zyxel Photos application can only communicate with a Zyxel router.Unfortunately, the Zyxel drive application is not designed for this purpose.Who can solve…
-
NAS326 Sleeps but struggles to Wake
Hello My NAS326 has started to have a
problem, when I reboot the NAS, I get full access to it, I can see it as a
computer and a media server and I can access the shares, also my backup
software can see the shares and backup as necessary. However, overnight
something happens and, in the morning, I can see the NAS as a media…
-
Trying To Use Two NAS326 in My Network
I'm having trouble getting a second NAS326 to be recognized by my workstation. I've followed the 3 steps then clicked the Start button on the screen. I press the button within 5 minutes displayed on the screen. I can't get the device recognized. I never get the Congratulations or Admin page button. Are there any special…
-
NAS540 Shows Healthy but RAID degraded.
When I look at my disks in storage manager they are all green. When I check them with SMART, two show up as BAD. So in theory I have Disk 1 and 4 BAD in RAID 5. Yet, I can still get access to all my data, no problem. I ran 'repair' three times and the logs say it was successful but I keep getting the RAID degraded message.…
-
NAS326 - MetaRepository: Download List Fail
Hello all I keep getting the "Download list fail" message when I try to Retrive the app list from the internet. I even tried to unistall and freshly reinstall the Metarepository. Here are the configuration and log files /i-data/1e45b118/admin/zy-pkgs/MetaRepository/zypkg.log Request:…
-
NAS542 folder in Adobe Lightroom
I can't find my NAS542 folder in Adobe Lightroom. I'm using windows 10. On my last laptop i had nas utility service app. but ik can't find it anywhare.
-
540 USB Port
When I connect a large (GPT) disk to the USB port the File Browser fails to recognize any data. Am I missing something?
-
NAS540 server name field bug
NAS540 V5.21(AATB.0): I gave server name harjus (Control Panel/ System/ Server Name) and for some reason UI responds with an complaint: Server name contains underscores('_'). If you use IE, it will fail to login. I fail to see where harjus has underscores. Maybe it's some odd character translation bug during name check.…
-
How is usage on volume on disk group calculated? And why does it differ from `du`?
I own a NAS542, it has 4 bays with 4 HDD. I've created an Disk Group with those 4 drives and it's running with ext4 in raid 5. The HDD have 5.46 TB usable storage each. When I go to my storage manager I can see that 58.92% (9.35/15.87 TB) of my disk group is in use. However, when I login using SSH and run `du` on the…
-
NAS326 - 100% cpu
Though I've had this nas for a few years, I've recently been having it act sluggish and CPU shows 100%. I read all I could and every server option and thumbnail generation is off. Multiple reboots. I removed all apps. It shows 100% cpu but underneath the services listed only total < 3%. Refreshing does nothing. Firmware…