-
NAS542 static route
Hello! I have a nas542 device. It has 2 ethernet ports. One port (LAN1) is connected to the Internet. This is the default, so I can access the device remotely. The other port (LAN2) is on the LAN. The IP address of the LAN-side interface, e.g. 10.10.1.5/21. The device is accessible from this LAN. However, we have…
-
Record videos from camera
hello everyone, I have a nas326 and I would like to record videos from wifi / LAN cameras. how can I do? i have IMOU cameras. thank you all.
-
NAS540 No longer network addressable
I front-panel powered down my NAS540 (power button, single beep, release). Device shut down properly. I swapped the power from one UPS to another and repowered the device. I have network lights at the switch (with activity) but it is no longer accessible via IP address. I've verified in pfSense that there is no new lease…
-
NAS326 vrátit zpět verzi firmware
Přestala být funkční utilita "NAS Starter Utility" a to jak u OS syst.Win 10 verz.21H2 build 19044.2006 i Win 7 -již nepodporovaný syst. Přihlášení do NAS326 je jinak funkční přes síť.adresu nebo jinak. Díky
-
during the firmware upgrade the nas326 is stuck
During the latest firmware upgrade (NAS326_V5.21(AAZF.8)C0) it starts and at 10 % it doesn't go further . It's 3 hours now in the process. If i go to the panel, which is extremely slow, i can see that the cpu usage is 100% and if i try to restart, reset i receive a message like "cannot, doing firmware upgrade ". the system…
-
I have a zyxel nas540. It's occurred a problem that I cannot reached nas device IP.
It's ok led's on device. But I cannot ping nas IP. Probably device not assigned IP. I've scanned network scope, but not founded any IP. I've just reset device (back to button etc.) but problem has continu.
-
Upgrade disks on NAS520
This might not be the correct area of the forum to post this, but it's the closest category that I could find. I want to upgrade the disks in my NAS520 from 4TB to 8TB. It's currently set up as RAID 1. What's the best way to do this? Kev
-
NAS542 How or if is possible make snapshots
I have Nas542 with 4 WD40EFRX-68N drives. Have RAID5. Heve some shares prepared and i want to have possibility to make snapshots of specific share. Have also Netgear NAS102 and there is simple to open make snapshots when you create share. Alese you can close or open this options later. I can not find some here in Zyxel.…
-
NAS326 increase password characters
maybe someone knows what can be changed in the system (root configs) to increase the number of password characters and add special characters. now is 14 characters and its too little for create secured pass. support refused to fix the issue.
-
NAS326 Firmware Update
I tryed to update firmware by web interface, but cannot find server to check the firmware. On zyxel website, when i click to "download", "ftp://ftp.zyxel.com/NAS326/firmware/NAS326_V5.21(AAZF.4)C0.zip" is not working... Is there any other place to find this firmware? FTP and FTP2 on zyxel is not working... #NAS_Aug_2019
-
NAS326 not visible in Computer
Hi Guys, Can you help with my little problem? I mean, I don,t see NAS in Computer/Network. Do you think that problem is with my Antivirus, I don't know maybe with firewall? I see just Twonky media, but I prefer access by folder. I already check with another computer and it's working, I see NAS, I can move folders etc... I…
-
NAS326 How increase password characters
NAS326 increase password characters.
-
HDD vom NSA310 - > NAS326?
Hallo @all, Ich bräuchte einmal eure Unterstützung bitte: Bisher habe ich ein NSA310 genutzt. Jetzt habe ich ein NAS326 bekommen und würde gerne die Festplatte aus dem NSA310, die voller Daten ist, in das NAS326 als Basislaufwerk übernehmen. Eine Festplatte ist bereits im NAS326 vorhanden.Funktioniert das ohne…
-
New NAS326 host, Debian client permission
Hi, I'm setting up a new NAS326 for home usage. Most of the PCs on the network are Windows with the exception of my desktop, which is Debian Bullseye, Xfce for my desktop environment. I am able to open files, but I'm not able to edit directly and/or save files from my desktop. I can open and edit from the Windows machines.…
-
NAs540 used as a rsync DESTINATION
Hi guys, may i ask if someone knows how to enable rsync SERVER in a nas540 device ? i would like to use a NAS540 as an rsync DESTINATION device. thanks for your help alex
-
Help With getting higher than SMB1 on nsa320
I believe this can be done with the metarepository which i installed a few years back and is listed as installed in the pkg page but it will not connect to provide an updated list of pks @ "h***://zyxel.diskstation.eu/Users/Mijzelf/zypkg-repo/" which i have set in the config page. I think the problem is the path of the…
-
Intrusion by ramsomware
Hello, Yesterday when I try access to my backup drive that was connected to my nas326 by USB, I see my files all encripted. I need some files that drive. The files have the extension .0xxx and i'am conserned about of security of the NAS. Do you have solution for this problem?
-
Nas 326 Login Problem after update
Hi!Like it says after update the latest firmware v 5.21(AAZF.8)CO i can no longer login to my zyxel. It works with cyberduck to access it and from the regular network but not from the login page. It says wrong user/password. But works on cyberduck. Does someone know the problem?
-
[NAS542] Moving existing HDDs with data (4x Basic, NO RAID) to a brandnew NAS542 Hardware
Hi @all, for some reason, I have to move my existing harddisks (used and doing fine on a previous NAS542) to my brandnew NAS542 box that I have already upgraded to V5.21(ABAG.1)C0. The HW-configuration on my previous NAS542 was very simple: * 4 similar HDDs mounted as 4 basic volumes (NO RAID, NO DISK GROUPS) * 4 shares…
-
NAS326 get more error: (401) and 100% CPU
When using WebDav periodically I got lot of errors. Error refreshing Webdav folder Test The remote server returned an error: (401) Unauthorized. And in process monitor WebDav using lots of RAM RAM - 426mbCPU - 85.2%/sbin/DAV_httpd -f /etc/service_conf/httpd_dav.conf how to fix???