-
NSA220 Firmware V3.24(AFB.1)
Hi, I'm currenty using three NSA220 NAS box's; now I know these nas drives are a long time out of service/support but they work realy well for the requirments I have and the basic funcionality that's required, and to be honest these little box's are well built, very robust and extreamly reliable. Is there anyone out there…
-
Can't instal NAS Starter Utility for Zyxel 540
I just reinstaled Windows 10 on my computer, and when i downloaded the NAS Starter Utility for my Zyxel NAS 540, it can't open the installer files, so i can install the Starter Utility. What's wrong, and why can't i get this to work?Anyone know what to do?
-
NAS326 Volume down
Hi,a few weeks ago i updatet FW to V5.21. recently i
noticed that the NAS is no longer responsive. A reset helped but now there is no volume left. I only have one harddrive with 3TB. I can see the disk on the WEB UI but there´s no volume. SMART infos can be read, all looks fine. Is there a way to save the data? I tried to…
-
Multiple things wrong with my Zyxel 542
Hey folks, thanks for the help. My Zyxel 542 (V5.21(AATB.7)) recently started to beep and indicating that I had a degraded disk group I have no option to restore the disk group I have 4HDD and I noticed that one was missing (Disk2) and I saw no activity on Disk2 on the front of the NAS. So I have changed the disk with a…
-
How to setup Backup job
Dear all I have 2 NAS326 machines. I want to have a backup from NAS A to NAS B with Synchronizatio (Publish) which results in the destination selection process. There was a problem unable to connect to NAS B, the system said Connection failed. I tried to use Domain Name as mycloudzyxel / and Ip address and I can't connect.…
-
Full Hard Drives
HiI have a NAS540 that I'm using as a video server. Over the past several years I've expanded the drives so I now have 4x3TB drives formatted to JBOD which are now at 90% full. I've bought a 16TB drive but can't find a way of copying all the files and then just inserting that into the NAS to use. Firstly I've had the 16TB…
-
Entware-ng / how to fix a wget error
wget: error while loading shared libraries: /usr/lib/libssl.so.1.0.0: internal error<br><div></div> this also broke opkg update opkg update<br>Package ldconfig version 2.27-11 has no valid architecture, ignoring.<br>Package libc version 2.27-11 has no valid architecture, ignoring.<br>Package locales version 2.27-9 has no…
-
Need Startup Utility for NSA210
I would like to setup the NSA210 from scratch. Can you please lnk me to download the Sartup untility and whatever software to get started from scratch? Thanks
-
NAS540 identical volume names
I have 2 NAS540. All drives in each NAS are configured as basic volumes, 1 volume per drive, 1 share per volume.To rationalise storage, I had to move 1 drive from 1 NAS540 to the other. However, now I have 2 times 'Volume2' in the same NAS. It appears to be working fine however.I have 2 questions now: * is it problematic…
-
nas 540 infected by .mars ransomware
Hello everyone
My Zyxel nas 540 system was destroyed by the .mars virus. All files got the .mars extension. I did a long search on the internet about the subject, but I couldn't find a method to decipher the files.
I would like the help of friends who have experienced the same problem and found a solution. .
-
NSA320 - RAID1 failed, volume down, how do I recover data? - Thread copied from another one.
Hi, for some reason i took out 2 hdd from this nas, and for some other reasons i have to put them inside again... and tada!! Accessing the nas from the win explorer it seem to be empty but from the status web page one disk is almost full. Scanned both disk with the following results and with the auto repair option checked:…
-
How to enable remote access for NAS326
Hello. I have 2 questions 1. Will a factory reset keep my data intact? 2. How do I set up my NAS326 for remote access over the internet? I want to access my files remotely from a windows pc. I have paired with myzyxel and created a zyxel.me name but nothing works. I have been tinkering for hours, please walk me through…
-
NSA325 v2 NTP failing to update
It appears that my NSA325 v2 quit updating the date & time via NTP some time ago. The log shows "NTP fails to update from pool.ntp.org" twice per attempted update. The error occurs regardless of which server I select. Is there an FFP, MetaRepository or other update I need to do to make NTP work again? BTW, THANK YOU to…
-
NAS326 with 18TB 4kn HDD?
Hi there,has anybody already tried NAS326 with 18TB 4kn discs (Toshiba MG09 series)? Is it possible to get it work?
-
NSA-325 v2 - upgrading drives
Hi, Looking to replace my current 2TB drives with 4TB drives. Right now I have a RAID1 setup. My plan is to pull one drive, add in the new 4TB, rebuild the array, then repeat for the other drive. It seems simple enough. Any major challenges I should be aware of? Or any better ways of doing this? #NAS_Nov_2018
-
NAS540 First one degraded disk, now volume gone
Hi all, I have the almost same issue as in this post: https://community.zyxel.com/en/discussion/9843/nas540-first-one-degraded-disk-now-volume-gone Nevertheless, I didn't push anything. My wife saw the error after it started beeping randomly 2 days ago in the morning. She did click on repair in the GUI but it just said…
-
Unable to connect to Twonky Media Server NAS540
I enable the server, click the link and the browser says "Unable to connect". I reset the server, still unable to connect. #NAS_Mar_2020
-
NAS326 External HDD Enclosure
If I plug in an external HDD enclosure of more than 1 drive will it recognize the other drives? Say an 8 bay non raid enclosure.
-
Help with unknow user logged in via ssh?
I have a Nas540 and i have a problem with someone logged in via ssh i think, and i dont know if any files are compromised but i have seen about 15-20 torrents added in transmission? A year ago i had the ransomware in my nas, textfiles in every folder that told me to pay... I moved all my files and did a factory reset. Now…
-
NAS326 - Transmission
Hello, I have a problem with Transmission. I have version 2.84zypkg002. Is it possible to have newer version? I want to set a password but i can't open, edit or copy transmission settings file even if Transmission is disabled
