-
Where can I get the Firmware Version: V4.70(AFO.3) for nas320?
ftp://ftp.zyxel-tech.de/2.new_mirror/NSA320/firmware/ can't be reached. Where can I get the Firmware Version: V4.70(AFO.3) for nas320? #NAS_Jan_2020
-
NSA 542 - not able to connect via Browser after latest FW upgrade
Hi - after the latest FW upgrade ( V5.21 (ABAG.7) ) I am unable to connect to the web UI nor on MAC (using Chrome, Firefox or Safari) nor WIN 10 (Chrome, Firefox, EDGE) - the NAS is running - the cables and ports on the NAS + Router are working and I can connect to it via a file browser (MAC - ForkLift / WIN - Total…
-
Filedate
I want to copy files from my Win10 computer to my NAS540. De dates on those files are sometimes before 1/1/1970. E. 23.02.1924. It are digital copies of very old pictures. However, the NAS does not accept those dates. How can I make the NAS accept those filedates?
-
Joomla 3.9.26 auf NAS540 ?
Guten Abend zusammen ich würde gerne Joomla 3.9.26 auf meinem NAS540laufen lassen jedoch ist die bereitgestellte MySQL und auch Php Myadmin application nicht kompatibel also meine frage ist können wir als besitzer eines NAS540 mit einem update der entsprechenden Komponenten rechnen damit wir in zukunft auch Joomla 4 auf…
-
Why is the NAS542 so horrible? (repost since you removed my first one)
I'm so furious, I won't be able to keep this post civil! First of all, doubts and fears were realized when being prompted to select a password. Only a tiny subset of special characters are allowed. - This device should be connected to the Internet??? Is nobody concerned about automated attacks??? Then the next let down.…
-
How to reset NSA325v2 without loss of data?
Hello everyone, I own two NSA325v2 and I would like to factory reset both of them and start completely fresh. However, I have four HDDs installed and I obviously do not want to lose any of the data. Is this possible? If so, how? 1. Remove the HDDs. 2. Reset the NSA325v2. 3. Hook up the HDDs to a Linux computer and erase…
-
NAS 326 problem
My NAS 326 is beeping. The firmware is the latest. * I took the hard drives out and put them back in and it still beeps. * I reset the unit but it does not seem like it can be reset. * I took the hard drives out and turned the unit on and it DOES NOT beep. * I tried to recover the data by using the Sabrent docking station…
-
Expanding Volume on Disk Group on NAS326 is not working
I have a 9 Tb diskI created a disk group of 3.84 Tb and a volume of the same size.Then I increased the volume of the disk group to 9 TB, but I cannot increase the size of the volume. The Edit button is not available. What do you recommend me to do?
-
URL Shutdown
Can I send a url command to NSA325v2 for shutdown? Does anyone out there know this? /Micke #NAS_Nov_2019
-
NSA325 v2 - original drive marked inactive after attempt at adding second drive
Had this Nas for a number of years. I've always had the 2 drives but only ever added one as I could never get the second to work . Got to the point where I now need the extra space. So installed the second drive and tried to add it, run did the checks and got to finishing setting up space, 36 hours still not finished (so…
-
Why is the NAS542 so horrible?
I'm so furious, I won't be able to keep this post civil! First of all, doubts and fears were realized when being prompted to select a password. Only a tiny subset of special characters are allowed. - This device should be connected to the Internet??? Is nobody concerned about automated attacks??? Then the next let down.…
-
How to connect remotely to my NAS326 storage?
I have just setup my NAS326 and I cannot figure out how to access it remotely. I have done all the setup, but I haven't found any help on how to do this. Can anyone help? Thank you, Steven
-
NAS326 - setting up FTP over TLS
Hi Guys I'd like to use Filezilla to log into my NAS326 from outside using the more secure "explicit FTP over TLS" rather than "plain FTP". On my old NAS325 I think I did this by self certification - but how do I do this on the 326? Help Please (I am a complete amateur!)? Ken
-
NAS542 - multiple basic drives without RAID
Hi, I am trying to create on my NAS drive 4 standalone drives which could be accessed seperately something like network drives \\192.168.0.123\Volume_1 and etc. I have found some question here: https://community.zyxel.com/en/discussion/9887/nas-542-use-raid-type-basic-with-multiple-disks I have posted a comment there but I…
-
NAS 542 use Raid Type Basic with multiple Disks
Hello, I have two some questions regarding using the NAS 542 without Raid (aka Basic). In the Manual it says for use with a single disk. Can I still use it with multiple disk which are used as separate disks? And if so, if one Disk would fail, would the data on the other drives be unimpaired? Thanks.
-
NAS542 Raid Recovery Loop
My NAS542, running raid5 consisting of 4 4TB drivers went into a a degraded mode. I then shutdown the NAS, and replaced the disk reporting issues. After which i started the NAS and began the recovery via the web interface. However it appears to keep failing after around 70% recovery where the unit proceeds to beep…
-
Bootloop after Power NAS540
Hi everybody,i played with the OMV on my NAS540. First install was fine and workedI dont know why, i installed it twice... and now i have a bootloop short after power connection.1. plug in Power cable2. vent starts slow3. all lamps in the front are white instead of copy button4. vent wents short a little bit faster5.…
-
Twonky server 8.5.1 upgrade on Zyxel NAS?
Hi,I wonder will the Zyxel NAS family still get software updates for all the installed apps? I look into the latest version of Twonky on the NAS.Thanksnpreis #NAS_Feb_2020
-
NAS540 cannot access web interface
So today my backup program gave me an error that it couldn't access the NAS. I tried to log in to see what the problem is, and the login screen on the browser tries to log in for a few minutes and then times out. I have restarted the computer and the NAS, reset the password (which it didn't do), reset all settings (which…
-
Nas 542 not visible in windows explorer
Hi, my 542 does not appear in the windows 10 explorer. I can see it in the browser by typing the ip adress. Also all my macs and media players see the nas. Any idea?
