-
USG20W-VPN problem after 5.39 upgrade with Geo Policy
Hi, I have two USG FLEX 50W (USG20W-VPN) that after upgrading to firmware 5.39 blocked ALL incoming rules with Local Geography (Italy)... Now I have set "Source IPv4" on "Any" to solve the problem on both device. On USG 200 and 100 no problem... any idea? Greetings Cristian
-
Important Zyxel Resource is Down
Hello, I was trying to set up an L2TP VPN today and when I clicked on "Configuration Walkthrough" it popped up a dead page (url listed below).https://kb.zyxel.com/KB/searchArticle!viewBlob.action?attOid=14441 I checked with a third-party site to see if it was just us and it wasn't. Also, according to MX Toolbox, there is…
-
USG Flex 200 internet issue
Hello! Internet issue. In the case of WAN1 internet, some websites do not load, but when I switch the device to WAN2 (policy route), the page loads immediately. What could be the reason for this? The content filter is turned off. Balázs
-
URL Cloud query Disabled
Hello, please tell me this question: we have set up filtering (URL Filtering), how to configure it so that requests do not go to the URL Cloud query and are processed locally on the device(ATP200) S/N S232L42102831 5.39(ABFW.0)
-
Port Security
Hello, An other thing what i am missing. (or i cannot find it) Port security. We want to secure all networks of our customers for unknown devices. the first option i was thinking about is mac vlan. So i can put known devices in a seperated vlan automatically. But i cannot find it, so next thing was port security. (learning…
-
Trans-zone SMB BWM: any howto available?
I have computer on DMZ and Backup destination on LAN1. I'd love to regulate bandwidth between for SMB/CIFS between these two hosts (on different zones and interfaces) for allowing smooth backups while not killing the firewall performances/services between zones (and internet). Security policy with time condition: achieved.…
-
Google Authenticator not available on USG
Have USG40 running V4.65(AALA.1). According to the various docs and release notes I should be able to use Google Authenticator for both Admin & VPN Access, however the only options shown are SMS and email. What needs to be done to enable Google Authenticator?
-
Firewall USGFLEX200H
I've a Zywall 110 and I need to change it (end of life) I'm looking for a product that can load the configuration file of my Zywall. Is it possible? USGFLEX200H could be the correct one?
-
1:1 Nat or Virtual Server
I cannot get this to work. My WAN address is (300.1.1.1) obviously not real. But I need to connect to a Mesenger Server in my LAN with an address of 192.168.1.210 utilizing ports 14121n 14122 and 14123. I have created the following, but cannot get it to work. I have disabled the Windows 10 Firewall to test on the…
-
RDP rule for USG50
Hello! I need a walkthrough to make several rdp rules for USG50.
-
IKEv2 android e ios
Hi, I followed this guide step by step: https://support.zyxel.eu/hc/it/articles/8805317185298-VPN-IKEv2-con-chiave-precondivisa-su-dispositivi-mobili-invece-di-L2TP#h_01HB6CZ4685VCSJ22W1NW2J98E but I can't log in to VPN, when I try to connect for example from Android, I get a message saying "connection not secure" and then…
-
SecuExtender for MacOS15
When can you expect an updated version for Mac OS 15?
-
Can SSL VPN Mac OS X client be activated after EOL?
Since the SSL VPN client for Mac OS X has reached EOL and new licenses cannot be purchased anymore, my question is: can existing unused licenses that have been already bought be activated on newly installed clients?
-
USG FLEX 500 Exclude equipment from planning
Hello, I'm working with a USG flex 500 and i create a planification to shutdown internet connection. It works well but now, i need to exclude to equipment and i don't know where is the exclusion on the schedule. Does anybody knows how to exclude two equipment or IP adresse ? Thanks for your answers.
-
VLAN Egress Bandwidth Not Respected on ATP?
Hello, I was setting up some equipment today which has minimum bandwidth requirements. So, I ran a speed test and was surprised by the results. Currently, the ingress/egress bandwidth is set to 10240 Kbps on the ATP. According to the docs, ingress is just filler for later use. Anyway, the speed test showed roughly 10 Mbps…
-
SFP P1 port does not work Link Down
Hello, i have exactly the same issue as described here https://community.zyxel.com/en/discussion/11102/sfp-p1-port-does-not-work-lind-down But device is Zyxel VPN50 (V5.37(ABHL.2) firmware) with ZyXEL SFP-1000T 1000Mbit / s SFP network transceiver module. Is it possible to get it work?
-
myZyxel portal - strange active/inactive devices (200H, Flex100, USG60)
Hello everyone, I went to: https://portal.myzyxel.com to check some downloads, I searched for the specific firewall. I noticed that a 200H linked to Nebula and working since 40 days, is still "inactive": While a Flex100 always online and linked to Nebula is set as "active": Is there a specific reason? For more infos I…
-
USGflex200 Suspicious Activity?
My firewall just went down this morning, after i restarted the device to get it back online i noticed somebody connected to the device and uploaded a bunch of Zyxel certificates and flushed the firewall rules. Dont know if this action was taken by Zyxel or not, so if somebody from Zyxel is reading this please let me know.
-
VLANs and AirPrint
Hello everyone, I would like to share a cable linked printer on LAN1 with other VLANs, to save money instead of having other printers in the same office. I have VLAN1 and VLAN2 for WiFi and LAN guests' networks. The printer is on LAN1 at 192.168.1.150, its main service is for internal usage. How can I let VLAN1 and VLAN2…
-
USG FLEX 200H ipsecvpn settings
Hello. Can I find a description of USG FLEX 200H remote express vpn settings somewhere?
