-
VMG8825-B50B support page disappeared
good morning, i would like to ask where i can find VMG8825B50B support download page, in zyxel site. there was a dedicated page, but now i cannot find it... someone could help me find manuals, firmware and other support items related to this specific model? at the moment the only item with 8825 in the name string is…
-
Zyxel PGM5617GA : Question about UPS port
Hello, I am a new user of a Zyxel PGM5617GA router that my Internet / Telephone provider has installed. I need to connect the router to a UPS to continue with the telephone service in the event of a power outage.I found that this router has a port for UPS with eight pins. I would like to know, if you can inform me, what…
-
PLA4231 Not accepting home router password nothing works locked out
PLA 4231 does not recognize password.
-
Zyxel XMG3927-B50A setting LAN interface to bridged mode
I'm trying to set a couple LAN interfaces to bridged mode, what I need to do? So far, I have created two new WAN interfaces in bridged mode and then I created two interface groups selecting the newly created WAN interfaces as WAN interfaces and selected the LAN interfaces. Then I rebooted the device. I have VDSL2…
-
XMG3927-B50A Temporarily unavailable
I have 17 WiFi devices and 7 wired devices connected to this router. Occasionally one or more devices gives me the error "The Network is temporarily Unavailable". The only way I seem to be able to rectify the problem is a power recycle. Both 5Ghz and 2.4Ghz see to be affected (I've tried switching off the 5Ghz and the…
-
I can't login to router
Hi, I've tried to log in to the router by 192.168.1.254 as it says in CMD ipcofig. I get the log in window but whatever combination of login/password I use I can't log in. admin/1234 doesn't work. I’ve tried to reset the device still no luck. This is important as I can't change the wi-fi password.https://192168ll.red/…
-
Blocking WhatsApp Instagram
I have had a ZYXEL VMG3625-T20A that my ISP for more than 2 years now give or take its always served me well but i now have requirement to block certain devices from access whatsapp and instagram at certain times .. is this router capable or do i require a new device.. regards
-
VMG8823-B50B connect to wifi for ethernet ports usage
Hello , is that possible to have the model VMG8823-B50B connect to the router of my isp via wifi and grant internet access to its ethernet port ? Kind Regards
-
Multiple subnets with AX7501-B0?
Hi, I try to setup multiple subnet segments beside my trusted LAN on an AX7501-B0. Unfortunately there's almost no documentation out there how to do that. The "Additional subnet" in the "Home Networking" section doesn't cut it. I need to have multiple subnets. Is that even possible with this router? If not, why is there a…
-
User Guide
I've just taken delivery of a Zyxel VMG8623-T50B router. Where can I find the user guide?
-
VMG1312-B10D - could not access the GUI, but a power cycle restored it.
Hello all, My faithful VMG1312-B10D router did a funny thing this week. I could still access my broadband and the Internet via WiFi in 2.4 GHz band but I could not access the GUI via WiFi. - I did not try to access the GUI via the Ethernet LAN ports. It is running firmware 5.13(AAXA.10)C0 dated June 2019. I power cycled…
-
Cannot register VMG8924-B10A
The VMG8924-B10A is supplied by some UK ISP and mine supplies this https://192168101.win/ router. When I go onto "MyZyxel" ( https://portal.myzyxel.com/ ) and sign onto the site, I cannot register this router even though I have the MAC and the serial numbers. There is also no mention of this router model at all on the…
-
AX7501-B0, no acces to LOG
Hey, When I try to access the log section of my routeur, it just goes into an infinite loop (forever). So, it is impossible for me to check the log or export it.
-
Can't log config web page on vmg8924-b10d
I am not able to reconnect into the config web page afer the first time. After I reset the device the default password work, I can config stuff but after that the loggin page juste say "user or password invalide". I've try to create a other user, dont work, or simply rebooting the device, still dont work, changing the…
-
ChromeCast not working
We have a Zyxel AX7501-B0 and our TV in the meetingroom is using a Chromecast device that was working with our previous router. We did a factory reset on the Chromecast before changing the router. Once the AX7501-B0 was installed and everything was up and running, we tried to activate the Chromecast again, but it is…
-
VMG3925-B10C Web Interface barely usable
I have recently been supplied with a VMG3925-B10C modem. My previous modem was a VMG8924-B10A and the web interface on that was pretty basic but usable. The web interface on my new VMG3925-B10C however, is totally useless. It is incredibly slow, takes ages to update a page when selecting any feature of it. It times out…
-
VMG3925-B10B wifi channel select don't work correctly
On the 5 GHz band, if the router is set to auto channel select, it always picks a crowded channel and drops out several times a week, sometimes several times a day. When I manually set a channel it is completely random whether the router applies the setting or not, or whether the wifi works at all on that channel (even…
-
Wie kann ich ein Zyxel Speedlink 5501 über WANoE konfigurieren?
Ich habe neu Glasfaser mit einer Fritzbox 7590. Nun würde ich gern ein zweites Netzwerk über WANoE auf meinem Zyxel Speedlink einrichten. Klappt aber nicht. Ich komme gar nicht auf den Router, 192.168.100.1 findet ihn nicht. LAN-Kabel geht von der Fritzbox in den WANoE Eingang. Was mache ich falsch?
-
PLA-407 Firmware
I am unable to find firmware for the PLA-407. I have 4 of these older units operating in my home and would like to check for a firmware upgrade.
-
C3000Z Port Forwarding and Application Forwarding reset after restart
I have a C3000Z with firmware CZD005-4.16.011.0 it is setup to port forward. Trouble is whenever I restart the C3000Z, it erase all the Port Forwarding and Application Forwarding information. It doesn't matter if it is a hard restart from unplugging the model or a soft restart from selecting "reboot" from inside the admin…
