-
Zyxel WRE2205 v2 NOT Working
My Zyxel WRE2205 v2 stopped working and I can NOT get any contact with it at 192.168.1.2 as I could before. The reset function (holding the wps button for 10 seconds) does NOT work either. I have tried the firmware upload (at 192.168.1.6) procedure (holding the wps button for 3 seconds after power on) with Tftp64 software…
-
ZyXEL ADPCM codec
I have a ZyXEL USB Omni56K Duo modem and want to send and receive voice streams on it, but to reach adequate quality I probably need to implement some "ZyXEL ADPCM" encoding because plain PCM provides too small sampling rate to transmit even medium quality voice, and it doesn't work through USB either (probably because…
-
Прошивка
1. Хочу обновить прошивку на "ZyXEL Keenetic 4G", на сайте не найду! Пожалуйста, дайте ссылку для загрузки обновления. 2. Как к "ZyXEL Keenetic 4G" подключить принтер HP Laser Jet P1102? #Others_Jan_2020
-
I have a ZyXEL VMG8924-B10A.
I have tried TP-Link mains adaptors to give ethernet via the mains wiring, but the router doesn't like the adaptors. I spent ages trying to get it to work, then I switched the router on and off and it then started to work. But after about 10 minutes of it all working properly, the TP-Link adaptors stopped working once…
-
VMG8924-B10A cannot nat additional subnets
Hi. I've got a VMG8924-B10A running the latest 1.00(AAKL.28)C0 firmware. This is my layout, with "=" being interfaces global ip=[Zyxel]=10.0.1.30------[10.0.1.0/27]-------10.0.1.2=[OpenBSD router]=10.0.2.254------[10.0.2.0/24]------10.0.2.1=server * The OpenBSD router has firewall disabled, and only a default gateway of…
-
is the ZYXEL PLA5456 compatible with the zyxel pla5206 v2
is the ZYXEL PLA5456 compatible with the zyxel pla5206 v2 #PLA_Dec_2019
-
Zyxel wifi adapter G-220 v2
My adapter will find internet and connect to it, but I go to use Firefox, and it says I'm not connected to the internet. I'm confused, i even checked on the control panel and it says I'm connected. What's going on, it happens at my house and my mom's when I tried to use it. Does internet speed effect these things? I'm not…
-
What is the default username and password on a VMG4927-B50A?
Any help would be great I'm trying to port-forward port 25565 #SP_Dec_2019
-
VMG8924-B10A 5ghz dropping daily
My 5Ghz constantly drops Internet Connectivity on a daily basis. I am running the latest 1.00(AAKL.28)C0 firmware. When the 5Ghz drops, the 2.4Ghz still works. When the 5Ghz drops the Ethernet stops working too. I have to turn the router off and on again for the 5Ghz to work again. How do I fix this? #SP_Nov_2019
-
Zyxel VMG1312-B10D timeoutted while upgrading
Hello, i was upgrading my Zyxel VMG1312-B10D It's been 5 minutes and user interface went blank. I thought there was a error and panicked, then i did a thing i shouldn't do, i cut the power off. Now there's not a light, it's just blank. No power at all. Please help me. #SP_Dec_2019
-
Configuring NAT on Zyxtel vmg8924 b10d (Tiscali provider)
The router is perfect and has a very good interface. I have added a set of NAT rules to my router configuration but i can't connect to these ports from outside. The adding of new NAT rule is very simple so I don't think to have messed up with the parameters, I have succesfully configured NAT ports on a number of previous…
-
VMG3925-B10C How to change the router log on password
Please can anyone tell me the steps to follow to change the log in username and password for a router VMG3925-B10C.The Post Office have no idea beyond saying when it is first booted there is sometimes an option to change it :-( #SP_Nov_2019
-
I have a VMG4381 modem with 500Mbps service.Only able to get approx 90Mbps.
Are there settings on the modem I need to change? #SP_Dec_2019
-
C1100Z NEW TO WI-FI, SEVERAL QUESTIONS
1. To minimize RF exposure, is there any operational or equipment harm created by unplugging (AC power) a C1100Z when not in use?2. How can I determine how much I can reduce the C1100Z's power output without affecting service delivered to devices connected to the router/modem?3. If I reduce modem wireless output power by a…
-
DDNS: IPv4 only? (VMG1312-B30B)
I want my router (VMG1312-B30B) to update my IP-address to noip.com. It works fine, except... it seems to only update my IPv4 address; not the IPv6. Am I doing something wrong, or is this router not able to do this? #SP_Dec_2019
-
PLA401v3 firmware
Hi all - I know this device is end of life, but I still have a use for it and am looking to upgrade the firmware - it's not available for download from the Zyxle site - any ideas where I can obtain the final version? #PLA_Dec_2019
-
How to access config-pages VMG1312-B30B from internet?
Hello, Is there a way to access the config-pages of my router (VMG1312-B30B) from the internet? So, not from the LAN by typing 192.168.100.1 in a browser, but from anywhere on the internet... I have DSL-connection with dynamic IPv6. Greetings, Janosik. #SP_Dec_2019
-
New setup of Zyxel WRE6505
I have changed my home network and have reset my ZyxelWRE6505 to factory settings. I want to configure it in a new place. I have tried to follow the set up guide. I am supposed to turn on the WRE6505 and connect my computer to the wireless network form the ZyxelWRE6505 and then go to zyxelsetup login site. 1. The network…
-
WRE6505 is blinking green
When I turn on the WRE6505 the green powerlight is blinking. I try to reboot and set back to factory settings by pressing the WPS-button for 5-10 seconds but the WRE6505 just keeps on blinking green. The WPS button does not seem to respond and there is no blue light showing. #Repeater_Dec_2019
-
VMG3925-B10C Can't connect to local NTP on a PC!
I'm using a VMG3925-B10C as a switch and have it 90% set up successfully, ie devices will connect to the internet from it. I wanted to use a USB drive from it, and again, largely set up ok however, files are not getting dated! This is presumably because the 'router/switch' is not itself connected to the internet? I have…
