-
Wired internet for LTE3301-M209
Hi! Bought LTE3301-M209...Is it any posibility for using wired internet on it? #SP_Jun_2019
-
VMG1312-B10A
Hello there, i have a problem with this model from zyxel, suddenly it stopped working and the power led is blinking slowly for 5 secs, then faster for another 8 secs, then stops blinking, it turns on solidly, and then the LAN leds blink for a sec then the other 4 leds blink for another sec and it seems that it reboots…
-
AMG1302-T10B Portforwarding
Hello, I have installed a cctv DVR, and I need to forward port 8240 to it to allow remote viewing of cameras on my phone, The DVR is on the same network as the Zyxel AMG1302-T10B and can be viewed on a web browser using its ipv4 address, the problem i am having is when I add a new rule under Service Define and I give my…
-
VMG8924-B10D Error 0x8007003b
Good morning. I've recently buy a Zyxel VMG8924-B10D router and I connected it a WD MyCloud NAS via ethernet. I receive the 0x8007003b (Windows 10 home) every time i try to copy files of any dimension from pc to NAS. How can i resolve this problem please. thank you. #SP_Jun_2019
-
VMG3925-B10B V.13
Looks like in Wireless set up in Protection Management Frames, the Required and Capable options are transposed. I'm sure I mentioned this to support. #SP_Jun_2019
-
Infostrada - Zyxel VMG8823-B50B - TIM
Hi. I have a Zyxel VMG8823-B50B, which I got from Wind/Infostrada. I am about to change operator going to have TIM Fibre. Will the modem work wih the new operator? Thank you. #SP_Jun_2019
-
Color of the WPS button on VMG4825-B10A
Is the color of the WPS button supposed to be solid red? I was upgraded to a ZyXEL by my DSL provider and having nothing but troubles. Can't print. IP addresses dropped from map , can't connect wirelessly to RaspberryPi. I reaching for anything abnormal that I can checkout. #SP_Jun_2019
-
How to connect a WiFi printer with wps
I might be fully blind folded, but i’m unable to connect my WiFi printer to my Zyxel WiFi mesh. Can anyone help? #Others_Jun_2019
-
VMG1312-B10A router: Unusual log messages
Within the last few days a new message has appeared in the logs: kernel: xt_TCPMSS: bad length (129 bytes) I haven't noticed any performance or other issues with the router. The message appears a few times a day. Is this something I should be concerned about? I'm running the latest firmware. Thanks in advance. #SP_Jun_2019
-
Parental Control Not Working on AMG1302-T11C Router
I have set up this router enabling parental control to block access to a particular URL.The service is enabled, and the profile is active, but the URL is not blocked.What else do I need to do? #SP_Jun_2019
-
vmg8823/8825 QoS Bandwidth
Hi, both routers have the same issue. I want to use the bandwidth to limit the bufferbloat but, having a 200/20 connection, I cannot do it because the downstream seems to be stuck/limited at 130/140 Mbps, despite I set il on the GUI at 195 Mbps or even more. Am I expecting too much from the QoS? #SP_Jun_2019
-
VMG4825-B10A - Mac running Mojave drops ethernet on Zyxel bonded DSL router: Where is the problem?
Hey All, I'm fine for days at a time, then I find the ethernet connection has gone south. I've got two adapters, Thunderwire and USB3, both exhibit same issues. Have rebooted my machine, still doesn't connect. So I use WiFi, then some time later it will connect. Router is: a Zyxel VMG4825-B10A, bonded DSL (two DSL lines in…
-
VMG3925-B10B - I have forgotten my configuration interface pasword. How can i renew it?
i have forgotten my configuration interface pasword. How can i renew it? #SP_Jun_2019
-
AMG1302-T11C Firmware Update
Hello I was looking at Zyxel Download Library for any firmware update for the AMG1302-T11C. The actual reason to look in the first place is that the current firmware doesn't synchronize with a time server and I can't adjust the wifi transmit power. I see the latest firmware is 3.00(ABCG.13)C0 issued on May 29, 2018. My…
-
(AMG1302-T11C) I have to press WPS button each time to connect wireless printer.
Hi, Each time I want to print I have to press WPS button each time to connect wireless printer. Is there a setting to permantly enable the WPS feature Thank you. Zyxel AMG1302-T11C. #SP_Jun_2019
-
xmg3511-b10a - Is there a way for me to use my phone hotspot to get internet to my zyxel gateway
Is there a way for me to use my phone wifi hotspot to get internet to my zyxel gateway xmg3511-b10a dual-band wireless ac/n vdsl2 bonding gateway with USB. I have no internet only on my phone and I want to setup A IP camera #SP_Jun_2019
-
Vmg1312-b10d - Hard reset does nothing?
Hi, my router disconnects every few minutes. I can log in to the router admin, but not always. I tried a firmware update this also did not work. Hard reset does nothing. Help? Specs: Vmg1312-b10d Firmw: 5.13 8a How do I delete rom from cli and reinstall? #SP_Jun_2019
-
(EMG3525-q10a) Why are none of my ports open when i port forward
I have a EMG3525-q10a router and im trying to set up a forge minecraft server for some friends. I havent been able to port forward since i switched internet providers. I have followed all the steps to port forward. It says my port forward works and is on, but when i use a port tester tool it doesnt work still. All my fire…
-
SBG3300 - receive IPSec no corresponding tunnel exists
Difficult to be explicit about this, but would appreciate any guidance. My Site-to-site IPSEC VPN between uk office and branch (in France) no longer shows a VPN connection on the home SBG3300 status window. Connection (and Ping) does not function and Fr branch ZyWall shows caption above (receive IPSec ; no tunnel..) . The…
-
vmg8924-B10A and ZTE MF823 4G dongle
My voodoofone VDSL service died and I'm trying to use a ZTE MF823 4G dongle until they can be bothered to get OpenReach out and get the phone line and VDSL service working again. My router was running 1.00(AAKL.18)C0 firmware and v1.16 of the 3G firmware. I updated to 1.00(AAKL.28)C0 and v1.18 and plugged in my dongle and…