-
VMG3625-T20A new firmware
Hello. I have some stability problems about VMG3625-T20A router. Can i have latest firmware to my router? br. Pertti
-
WAH7706 - Disconnected from Internet
Hello, I just bought this device and trying to make it work. I can connect, enter the sim code and all. The screens and UI display 3G or 4G and the Network Operator, but the internet status is disabled. I went throught the wizard, no luck. There's an IP v6 allocated but no IPV4. How should I proceed ? Thanks. Antoine
-
My del1312-t10b power and Ethernet lights are blinking and my dsl light is on
Hi I have zyxel del1312-t10b for while and its working fine but after i turn it on today power and Ethernet lights blinking and dsl light is on when its no connection and i unplug the dsl cable and its still on I tried to reset it but its not working and my pc even cant connect to router with router cable to see setting…
-
pla6457 Software
Last week I received my PLA6457 and must say…it works prety good however the software on both units are realy crapy. It got the looks from the stone age and now or than one unit seeems to disapear from my network. Also a name change of the units seems impossible and if you misspel your new password the only way is to reset…
-
Zyxel nwd6602 5g network do not apper using android 5g acces point
When I create a 5g network with an android mobile, the network does not appear in windows 10. Using w10 pro x64 on a pc with all the updates 22H2 I've tried the latest drivers and it doesn't work
-
VMG4381-B10A dropping internet connection
Hello,We have a VMG4381-B10A with Cincinnati Bell. The modem regularly drops the internet connection. it appears to be mainly when an iphone or a macbook is used. The drop time is from a few seconds to a minute. It can happen very quickly. The drop is best detected by Net Uptime monitor which pings 3 websites on 1 second…
-
3425 Firmware
WE are currently using 100AAYJ13C0.bin firmware. this the latest GA load? #CPE_Oct_2018
-
i cant update my router VMG3625-T50B
During the VMG3625-T50B firmware upgrade I'm facing the following error:Image uploading failed. The selected file is an illegal image. You may press 'Cancel' to upload another firmware image file, or press 'OK' to reboot to recover normal operation.My Current Firmware Version: V550ABTL0b2rNewest version: V550ABPM6C0or…
-
ZYXEL AMG1302-T11C ROUTER
hi guys, i have a (ZYXEL AMG1302-T11C Wireless N ADSL2+ Gateway router) had this router for a few weeks, now using post office broadband, my son now says that some nights when streaming movies that his TV buffers some times, i think this could be a a night when all the family are in using the internet, The firmware on the…
-
Zyxel nwd6602 5g do not apper using android 5g acces point
The access point does not appear using nwd6602 and android mobile with a wpa3 and 5g access point. It only appears when I use the 2.4g network I have tried with the latest drivers and it does not appear either Appers and can conect with other android phone also in laptop with intel ax 9260
-
PMG5617GA resets SSID and pass with electricity-cuts
Hi PMG5617GA , firmware V5.40(ABNA.1)C0.1 When a micro-cut is produced, the Wireless network turns off SSID is set to "ZYXEL1234" and pass set to "ZYXELABCD" However the 5G network --that I always have it turned off-- still keeps its SSID and pass I'd like to know where that settings come from ( ZXYEL1234 / ZYXELABCD ) I…
-
Where is the PLA4215 support?
All informations are gone, no files on the FTP. Everything is gone?
-
Expand PLA6457 Network
Hi, up to now I have two PLA6457 powerline adapters running here. So far they work fine. The connection between these two is encrypted. Now I purchased another pait and intended to have them join the same network. I had a look at the User guide where it states: "Your network can be further expanded by plugging additional…
-
Upgraded the firmware on PLA4231 and homeplug not working
I have PLA4231 and PLA4201 v2. They were working just fine until I upgraded the firmware to the latest one on the PLA4231. Now the HomePlug LED is off on both devices which means that they are not detecting each other. Where can I find the original firmware of the PLA4231? Or it there another solution to this?
-
My provided login Username and Password are not working.
My provided login Username and Password are incorrect. I checked under my modem for the info given and when I try to log in to Set my new password it says that the username or password are incorrect, how is that possible?
-
CZ O2TV (IPTV) don't work on VMG8623-T50B, but on VMG3625-T50B works OK
I changed the VDSL modem Zyxel from VMG3625-T50B to VMG8623-T50B for VDSL2 and IPTV use and my O2TV (IPTV) stopped working. I configure the new 8623 similar as 3625, but IPTV from local IPTV provider stop play the actual TV program. Actual firmware on VMG8623-T50B: V5.50(ABPM.6)b5_V0_20210906 (WWAN is 1.22) I normally set…
-
Not accepting home router password nothing works locked out
PLA 4231 does not recognize password. DG Paystub
-
VMG8623-T50B - V550(ABPM.6)C0 - Static DHCP clients limit
Hi guys! Anyone know if ther's a way to get rid of 32 client limit for static dhcp assignment? (Already tested the backup file mod trick.. don't work). I have the firmware source from zyxel, but never modified a router firmware.. so no idea where to start, eventually. Someone able to point me in the right path?
-
zyxel VMG8623-T50B
What is the latest firmware for the modem Zyxel VMG8623-T50B and where found to download?
-
How to configure dns
Can someone guide me how I can assign opendns IP in my home router?Model PMG5617-R20BFirmware version - V100ACCU0b8 Also I tried parental control and it seems not working.