-
zyxel VMG8623-T50B
What is the latest firmware for the modem Zyxel VMG8623-T50B and where found to download?
-
How to configure dns
Can someone guide me how I can assign opendns IP in my home router?Model PMG5617-R20BFirmware version - V100ACCU0b8 Also I tried parental control and it seems not working.
-
How to configure opendns with home router
Can someone guide me how I can assign opendns IP in my home router? Model PMG5617-R20B Firmware version - V100ACCU0b8 Also I tried parental control and it seems not working.
-
Modem only VMG8825-T50 & ASUS RT-AX88U Router
Hello everyone. I've just had fibre installed with VoIP and been given a VMG8825-T50. I previously was using a very old Virgin Media router with the amazing ASUS RT-AX88U. I've accessed the admin console and change the VMG8825 vdsl to bridge and turned off the firewall as per the online instructions. This did pass ethernet…
-
PLA6456, 2 pairs as a LAG?
I've read that multiple PLA networks on LAN, or single subnet don't interfere or degrade each other even though I would think it would. I installed my first pair to an outlet I installed to the main electrical distribution panel, on its own beaker which shares the same bus blade as the 100 amp breaker that feeds the garage…
-
Has firmware updates for the C3000Z modem been discontinued ?
The firmware I have is CZD005-4.16.011.0. When I check for an update it says this the current version. If I'm not mistaken this is around 2 years old.
-
SBG3300_NB00 connecting problem
I have a SBG3300_NB00 wireless router. I have configured it under IPOE encapsulation and everything seems to be ok (In the status page is written that the ethernet is active), but when I connect to the router through the LAN or Wifi I have no internet. While when I connect the ethernet directly to my laptop and set the…
-
How to Update firmware AMG1302-T11C
How to Update firmware AMG1302-T11C
-
pla6456 power light does not turn on
Brand new out of the box, one unit’s power light does not turn on. Is there some way to reset unit?
-
pla6456 ethernet
Why does my pla6456 ethernet show ETHB as 100 and not 1000 even though I'm connected to a gigabit router with a 300Mbps internet connection? Using cat5e cables.EthernetExternal Interfaces:InterfaceSpeedDuplexInterface TypeModeInternal PHYLinkETHA100FULL_DUPLEXRGMIIMACNONOETHB100FULL_DUPLEXSGMIIMACNOYES
-
Zyxel XMG3927-B50A connection drops
Had this router about 5/6 months now, first couple of months perfect then all of a sudden on just the one device (laptop) the connection drops and disconnects me from the internet (router was provided by my ISP). Anyway, that laptop has gone and I upgraded and bought a new one, but it does the same thing. All the other…
-
Home&Life Hub vmg8825b50b in Bridge Mode
Hello, I have one Home&Life Hub that's my internet provider in Italy gave to me 3 yrs ago, but I change the country and they leave the router. Now I'm trying to use this VMG8825 as my network extension for network and wifi. I installed the router in my second floor and I´m try to leave in bridge mode, allowing to receive…
-
Firmware for vmg8825 b50b
I am using your vmg8825b50b product with firmware 5.1.ablz.1_b10 and I have some problems with the stability of the system: it often does not allow the WIFI connection and I have to switch it off and on again. I found a version of the VMG8825-V517ABNY7CO product
Firmware Release Note
V5. 1 7 (AB N Y 7 C0
At your…
-
Spotify Connect not working with VMG3927
Hi! I have problems with getting Spotify Connect to work with VMG3927-B50A. I have Marantz NR1050 AV receiver connected to the VMG3927's WiFi and I can the Marantz AV receiver in ZyXEL's connectivity dashboard correctly and other networking services on Marantz work fine. I can also see Marantz in Spotify app as Spotify…
-
Zyxel8825-T50 extremely slow USB network
Ever since I have the Zyxel8825-T50 my internet itself runs smoothly on 100Mb/s. No wonder since I own one of the fastest configuration at this moment available. No worries there. I have this modem because of its possibilities to run an USB hard drive or flash drive to have my own home network. It arrived two months ago,…
-
PLA 6457 stability issue
I have problems with stability, the devices work fine when they work, but once a day at least the domain master stops working and its connection light turns orange, but only that of the domain manster. The firmware has not been updated on the site for a while, the pla6456 has received more firmware updates, I wonder if…
-
Firmware Update?
I have a VMG4927-B50AIts current Firmware is:V5.13(ABLY.6)C0 Is this the current version? I cant find the page where my firmware is located on the zyxel website. I've been having some connection issues since a different device joined the network and I think its security related....
-
VMG8924-B10A Firmware upgrade
My current firmware on router shows as V1.00(AAQU.1)b24 and latest firmware available on the ZyXEL site is 1.00(AAKL.21)C0. I did the firmware upgrade to the latest but my router wasn't updated. I have done multiple times but it still shows old firmware. Does any one know what went wrong? #CPE_Dec_2018
-
PLA5456 won't power on, triaged, appears to be dead, howto RMA?
I have a Powerline PLA-5456 and it appears to have died today. How do I check if it has any warranty associated with it left and if so how to initiate that process?
-
Zyxel VMG1312-B10D: Your device is under attack.
Buongiorno. Quali sono le cause che generano questo messaggio automatico (Your device is under attack) nel router Zyxel VMG1312-B10D? E' frustrante non avere alcun tipo di spiegazione di questo problema. Grazie. Luca Nardini. #CPE_Mar_2019
