-
GS1920-24HP Vlan, Mitel 108 mit OpenCom 510 verliert immer die Verbindung
Wir haben folgende Konfiguration: Sophos XGS2300 mit LAG über 2 Ports mit GS1920-24HP (a) verbunden. Hierüber werden seitens Sophos 6Vlans u.A. Vlan 50 für Voip an den Zyxel Switch übergeben. Die LAC Ports sind als PVID1 alle Vlans hinterlegt. Von hieraus geht es weiter an einen 2. GS1920-24HP (b) die Verbindung ist…
-
GS1350-18HP show offline
I'm new to Zyxel and Nebula and I installed a XGS-1930-28HP and a GS1350-18HP today and the GS shows offline. The GS is connected via an SFP module, link status leds are good, the GS show up in the client list and I can ping it from the XGS. The GS actually shows up in the client list twice with two separate MACs one is…
-
Cable diagnostics function XGS1930
Good morning, I have tested cable diagnostics function on XGS1930 and i have found a strange result about Cable lenght result. I have test a cable of about 1 m leght but the test function detect a lenght of 4 m. I have repeated the test with a 15 m cable and the test result 22m. If i repeat the test with the same cable the…
-
Setup switch spanning VLAN with XGS1930 series
Hello, I would like to use a fibre connection between two XGS1930 switches to transport two logical networks separated by VLAN: Or described in other words: All data on port 24 of the left switch (1) belong to VLAN2 (switch should tag them accordingly). All other ports (except SFP+ port 28) belong to VLAN1 (default…
-
Switch POE down.
I am using ZyXEL Gs1920-24HP to supply power for the access point. However today, the switch cannot supply PoE, but connecting to the computer is OK. Does it mean the switch is failing or what should I check? When I adjust the PoE status, the below error appears: Error: set PoE Management Extend Configuration fail!
-
Do I need a VLAN for IPTV (Magenta TV + Zyxel GS1920-24HPv2)?
Hello, I use IPTV from Telekom Germany connected to Zyxel GS1920-24HPv2. My question is: Do I need a VLAN for the Meda Receiver, to protect the LAN/WLAN from Multicast flooding? If yes, can anybody provide me a tutorial/guide to do this? Thanks in advance!
-
XGS1250-12 LACP & RSTP Support
Hi, just received my XGS1250-12 devices and found out that LACP & RSTP support is surprisingly lacking. Are there plans to add support for LACP and Rapid Spanning Tree Protocol (RSTP)? I also have a GS1900-8 which supports both. Thanks & best.
-
GS1200-8 vs. VLANs (OPNsense)
Hi everyone, I am fighting with VLAN setup on GS-1200-8 switch. My setup is OPNsense router with VLANs defined and I would like to use GS-1200-8 port 1 as uplink from that router with all VLANs so I setup all VLANs in switch config as tagged on port 1 (including VLAN 1). I would like to use rest of the ports to be a…
-
VLAN GS1900-48 VLAN
Hi, I have UniFi switches for all my main network but i have a issue adding the CCTV Lan to my Zyxel. Port 48 is a trunk port and my CCTV and lan is carried from my UniFi switch over to port 48 I would like port5 on the Zyxel as for my CCTV vlan only. Port 5 is untagged and port 48 is tagged for VLAN4 and 48 is a trunk…
-
XGS1210-12 switches with Ubiquiti Access Points and Controller
I am trying to replace my current 1GBps HP switch with two XGS1210-12 switches for 2.5GBe connectivity. Apart from the LAG issue for 10GB SFP ports (Which hopefully sounds like there might be a fix), I've now discovered a real problem with my Unifi devices. I have a Unifi local controller, with 5 Access points; 3 AC-HD, an…
-
GS2210-24HP Firmware Update
hi, i try to upgrade GS2210-24HP firmware from 4.1 to 4.5, but it show question mark on zon utility. and i also try to install firmware one by one, however the offical website hyperlink cannot be download. pls help.
-
XGS1910-24 Firmware
Can someone maybe provide a copy of firmware version 1.00(AABW.2) for XGS1910-24? I found the latest 2.00 firmware on the EOL list: https://webservice.zyxel.com/end-of-life But according to the release notes I first have to upgrade to version 1.00(AABW.2) which does not seem to be publicly available anywhere on the…
-
XGS1210-12 Link aggregation with Synology DX-513
I picked up the XGS1210-12 as I liked the specs - the 2.5GbE ports, plus the SFP+ sockets and, (most importantly), the option of link aggregation in the latest firmware. I connected things up and booted my Synology with it connected to ports 1-4 on the XGS. I've tried to get link aggregation configured to give me more than…
-
Do any of the MODERATORS actually verify and approve posts by new users?
I have a detailed question which I edited and is awaiting approval... can someone take a look please?
-
XGS1210-12 - Which 10G SFP+ Copper Module ?
Hi! I am wondering if anyone could recommend a suitable 10G SFP+ Copper Module for the XGS1210-12 Switch ? When I am looking for modules I see they are certified for certain brands... Which ones would work with the XGS1210-12 ? Thanks in Advance ! Best Regards From Martin Brandt.
-
log messages
I have a Zyxel GS 2210-HP switch and I have Dlink DAP-2610 antennas connected to that switch. A few days ago the antennas are restarting and the following log started to appear on the switch: 6432 Sep 06 15:38:53 NO system: PethPse Port 18 OnOff Trap, Port Detection Status is Disabledabled6434 Sep 06 15:38:53 NO system:…
-
GS1920-24HPv2 - Configuration due to "Saving Power"
Hello, is there any option for GS1920-24HPv2 to saving power? I have connect 4 Devices which uses the POE function.Is there any option or configuration for the switch to save energy?
-
xgs2210 I lost ip interface
HelloI have 2 xgs2210 switches in a stack.I don't know why but I lost the web interface.I connected to the console to assign it a new management address but I have errors (routing table)do you have a procedure? Best regards
-
GS1920-24HPv2: Disabling SNMP?
Hello, in my Homenetwork I am using a GS1920-24HPv2 Switch. My question is: How can I disabling the SNMP because I have note found any disabling/deactivating option in menu "Management -> Access Control -> SNMP ->..." The newest Firmware is running on this switch. Thank you for your answer!
-
Problem with switch RGS200-12P
Hello everyone, I try configure vlan on my switch, i delete native vlan, create our vlan with tag 99. Create IP interfaces with adress 192.168.99.110 then i create trunk port. Why i can't connect to web interface switch from another site (192.168.1.0/24) when i create second ip interfaces witch adress 192.168.1.163 and…