-
Switch port fixed or normal? Whats the different?
Hello support /
forum, I have several
Zyxel switches in use and work with Vlan and the NWA APs without any problems
in the past. Now I have a new Zyxel Switch GS1920 24 with firmware V4.50
(ABMH.5). My APs send different SSIDs from different vlans. The Vlan1 is the
MGMT Vlan for me. Usually, I only send tagged signals to…
-
Are the GS1350-6HP SFP ports gigabit only?
I have an application where I need to plug in a 100T connection to a copper SFP port of a GS1350-6HP. Will this switch support a 100T connection?
-
REAL Surge Test on GS1350-12HP is available now!
The cloud-managed surveillance switch GS1350 series claims to be built with tough surge and ESD protection for reliable surveillance network. So people are curious, is this true, or is just exaggerating? To prove our GS1350 is that tough, we did the surge test by surge generator in a professional lab. We also tested…
-
XGS1930 Series Going Away?
I own an XGS1930-28HP that I like very much. I tried to buy an XGS1930-52HP today but no one has them and all indicators out there are that this whole line is going away soon, even if there's nothing official from Zyxel. Two questions: 1) is this line of switches being discontinued, and 2) if so, can someone recommend…
-
PoE Timerange on XGS1930-52HP
Hello,i'm trying to set a PoE time range, but seem not be able to enter any time info (see below). The text field is unresponsive. Tried with Firefox and Google Chrome / Chromium. Firmware is XGS1930-52HP_4.50(ABHV.7)C0 Thanks
-
High latency on XS3800 switch on 10G SFP+ ports (+0.200ms)
Hi, we observe high latency (avg. 0.200ms) on XS3800 switch between 10G SFP+ ports. This is our cluster communication and the high latency creates significant delay. Cables are 2m long. --- 172.16.1.6 ping statistics --- 664 packets transmitted, 664 received, 0% packet loss, time 678893ms rtt min/avg/max/mdev =…
-
Change management VLAN on GS1200-5
Hi, Management VLAN must be VLAN 1 on GS1200-5. The 8 ports equivalent switch (GS1200-8) had the same issue but has been fixed by recent firmware update. Any chance to have the same fix for GS1200-5 too ? Thanks
-
GS1200-8 VLAN set up (Firmware V1.00(ABME.5)C0)
This is my first time ever configuring a managed switch and I'm struggling to get it to work. All i've change so far is the IP Address, password and name. I've attempted to configure a seperate Vlan for the PC on Port 8 by setting ports 1-7 as untagged members on VLAN1 and setting Port 1 (the router) as tagged on a vlan 3…
-
XGS3700 - intermittently slow responses to pings and CPU over 100% messages in log
I was making some changes to the configuration of my XGS3700 switch stack and experienced occasional slow loading of pages in the web user interface. Sometimes taking as long as 2-3 seconds for a page to load. I decided to run a continuous ping from a PC connected to the XGS3700 stack and saw intermittent slow response…
-
Seperate Networks
All, I want to do the following: 1. Connect port 1 to ISP Ethernet (ISP uses VLAN 4 for IPTV). 2. Connect port 2 to router WAN side excluding VLAN 4 3. Uses port 3 till 8 for IPTV (VLAN 4) 4. Connect port 24 to Router LAN side 5. Uses port 9 till 23 for local switching I assume above is possible? I have a TP-Link now doing…
-
VLAN with non-vlan aware router
I have a GS1900 switch attached to my router on port 1 (Asus RT66U), 2 wifi access points on ports 2 and 3 (TPLINK EAP245V3) with no vlan setup. Everything works ok. My router handles DHCP and gives access to the internet to all devices connected. I want to switch this to use VLANs so that I can better segregate from…
-
GS1910-48: How to make a VLAN Trunk? (Firmware V2.00(AAAZ.0)C0)
Hello folks. I have recently purchased a GS1910-48 and updated the firmware to version V2.00(AAAZ.0)C0. I am very familiar with Zyxel switch GS3700. But the interface of GS1910-48 is quite different. So, what i want to do is: - Configure VLAN 10 on ports 1 and 2. - Configure VLAN 401 on port 4. - Configure VLAN 402 on port…
-
GS1900-24HP
hi.need help pleaseI turned on the zyxel for the first time and connect through 192.168.1.1 nothing strange so far when naming the ports and do other configuration on the system I loose access to the page 192.168.1.1 I've already turn off the switch and also reset the switch but still cannot have access Can anyone help me?…
-
Why there is no GMT +5:30 time zone in GS 2200, 2210, XS3800 and XGS4600 Switch
Hi, we are using 150+ Zyxel switches, we are in +5:30 time zone but there is no option to select our time zone in mentioned switch. can any one please help me to resolve this issue ? Regards,Kaushik
-
Who here own a GS2220?
Hi Some Support Member here think its the Switch I want. Well many thinks looking good. But there are some question left I have for someone who own one. Please Note I dont want to use there Cloud stuff. I got a ATP200 and use Zyxel AP to. Thanks
-
New to VLAN's - could not figure it out...
Hi, Under covid-19 conditions, where every family member is at home (work & education), I wanted to redesign my home-office network. I've got two Zyxel GS1200-8 switches and have the following design in mind: * VLAN 1 - outside towards Internet / will not be used unless emergency * A dual NIC SBC based router/firewall…
-
GS1900-16 - No IP from upstream DHCP server for voice VLAN device
My landscape consists of a UDM-PRO providing DHCP for two subnets named LAN (VLAN1) and SIP (VLAN10). The configuration on UDM-PRO works fine for any devices directly connected to a UDM-PRO port. In fact, it even works for a phone connected to an unmanaged switch connected to another port of the UDM-PRO. The only device…
-
Re: Anybody Use Zyxel Switches?
-
When does new L2 Switch arrive?
Hi The XGS2210/GS2210 Series is a little bit old. The only "new" is GS1300. Someone where mention here that "some new one" will come but no infos which one (L2 or now) and when. So does anyone have insider Information? Thanks
-
XGS1930 Vlan Trunking
I just purchased an XGS1930 switch, this is to replace an old cisco switch. the old cisco switch has the following configuration: ports 1-45 vlan 1 port 46 - Trunk Port with all vlans - Temporary port for XGS1930 testing and configuration port 47 - Trunk Port with all vlans - 2nd SwitchPort 48 - Trunk Port with all vlans -…
