-
Latest firmware update 2.60(AAHK.3) Gs1900-24E reset to factory default settings.
Why firmware update v. 2.40(AAHK.1) to 2.4(AAHK.3) reset switch to factory default settings?Also history of "Port Counters" and "Bandwidth Utilization" has gone.
-
XGS1210-12 disable QOS
Is there a way to turn off QOS settings alltogether?
-
QinQ and non-stacked (single tagged) packets on a port; zyxel 3700
I have CLI access access only to a 3700-24. It is in a live environment and so I cant experiment with it. Up until now all ports in use have been non QInQ vlan tagged. I now have a more complex setup coming along. One port lets say 1 will bring in a QinQ packet. Lets say 999 on the outer and 888 on the innner. I need to…
-
Switch GS1920-24 - low lan speed
Hello. Few days ago I've swapped my TP-Link gigabit switch with GS1920-24. Everything else remains the same, cabling, devices etc. With TP-Link I was getting full gigabit speed between clients. With new setup, I'm only able to get 300Mb+. Switch is after factory reset and only one configuration change - I have one vlan…
-
2 vlan on xgs1930 + internet without USG
Hello I have an internet box (without vlan management) + 1 Switch xgs1930-52. I have configured 2 vlan (vlan 1 and vlan 2) on my xgs1930-52. The PCs in the 2 vlan must not be able to see each other but they must be able to go on the Internet. All this without USG (router / firewall) How should I do ?thank you in advance
-
Can I use an ES-105A v3 as a Power over Ethernet Switch
I want to use an ES-105A v3 as a Power over Ethernet switch between my router and an external camera
-
GS-1200 Series and Zabbix. Any experience?
I would like to monitor few GS-1200 series switches (3 8 ports, 1 5 port) using Zabbix. Did anyone have already do something and willing to share some info?
-
Switch for AP 802.11ax
Hello.wi-fi6 offers speeds of more than 1GB. Which POE switch do you recommend for 8-10 access points with up-link 10gb?
-
Zyxel p660r need congfgriton setting
Adsl2 access router
-
VES1724-56B2 Fanless Standart ROM benötigt
Moin, ich versuche jetzt seid mehr als 1h einen VES1724-56B2 zu resetten. Die Anleitung sagt ich soll die Standart ROM laden aber diese habe ich nicht. Ich habe versucht auf den Zyxel Seiten diese Datei zu bekommen aber nichts gefunden. Deshalb jetzt hier die Frage wie komme ich an die Standart ROM ran oder wie resette ich…
-
XGS1210-12 [FW: V1.00(ABTY.3)C0] - Port Speed not changable
Hi, if i try to set on interface 9/10 the portspeed to 1GB/s, it doesnt work.If you click on Apply, its back to auto and the speed stays at 2,5GB/sSame for any other port or any other speed. Cant change anything at all. Did i forgot something or is it simply a bug? Please check that :-)
-
GS1900 MAC Based Static VLAN
Hello there, I'm about to handle a network with one GS1900 and two GS1100 switches. What I'm trying to do is isolating corporate computers from public ones. So I thought it could be achieved by creating a VLAN and then adding static MAC Entries but when I tried connected device got IP from VLAN 1 again. Is it something…
-
On XGS1010-12 The two 10Gb ports cannot be used at the same time for me
I used an xgs1010-12 to connect my computers to my router and I have a 1.5 Gbp internet service. Both of the 10Gb sfp+ ports seem to be working fine if used alone. I used port 12 or port 11 as the uplink connected to my router and both worked. I could reach the full speed of 1.5 Gbps though a 2.5Gb connection to my PC.…
-
is it possibel to upgrade a GS1200-5HP with V2?
is it possibel to upgrade a GS1200-5HP with V2? i need the mirror functionality
-
On XGS1010-12 The two 10Gb ports cannot be used at the same time for me
For some reason I was unable to update the previous thread with same title, so I have to start a new thread here. Hope the admin could merge them. Thanks a lot to Jonas for the prompt reply with detailed information! My router is an Intel i3 9100 computer with pfSense v2.4.5-p1 installed.It has a dual sfp+ port 10 GbE NIC…
-
Problema de ingreso al GS1200-8
Hola, me resulta imposible ingresar a la configuración del GS1200-8, estoy ingresando en el navegador la dirección http://192.168.1.3 y no puedo ingresar. Mando captura de pantalla. ojalá alguien me pueda ayudar. Saludos.
-
Moved: How to configure port failure redundancy in Zyxel GS2210 24 Port Switch?
This discussion has been moved.
-
Suddenly can't use either of my Zyxel switches when connected to my home DSL router
I've been in contact with support for my TP-Link router because I have tried two different Zyxel switches which were both working before and have both stopped working now so I assume it was a problem with the TP-Link router, but they have said I should check with Zyxel as well, so here I am! I drew them this diagram to…
-
GS1200-8HP v2 loop detection
Hi,I got a brand new switch and when I plug it into a computer, it works just fine. But if I plug it to GS1920-24 or GS1900-24E, it complaints loop detected even when I have only these two connected to it. Is it broken? I can disable the loop detection but does not really make any sense to do it.
-
XGS1210-12 - 2.5G ports dropping intermittently
Hi! I recently got a XGS1210-12 for my home lab environment and have been using it to upgrade the bandwidth between my devices. One thing I've started to notice in the logs however are that both 2.5G ports seem to lose link simultaniously and get it back a few seconds later. This seems to occur about 2-3 times an hour and…
