-
GS-1100 16 PWR LED blinks fast
Hi Everybody, I have a GS 1100 16 and now my LAN ist gone. The PWR LED blinks very fast. I switched the power off and on again,but the LED still is flashing. Is the switch now at his end of life, or is it possible to reanimate it? Best Hoffi #Biz_Switch_April
-
GSX2210-28 Access To Web GUI Through Truck Ports and Different VLANS
I have Ports 25-28 Trunked and Aggregated to other switches on the network. When I try to access any of the interface IP's of the switch through the Trunk's even the Default the Web GUI is very slow and many times the session gets severed. The only way to access the Web GUI without any issues is by plugging directly into…
-
HTTPS: Create self-signed certificate with unique serial
Hi guys, I have got a bug report/feature request: When generating a self-signed certificate for HTTPS, the switch always uses its MAC address as serial number, which is not permissible and causes Browsers to reject connecting to the device when a certificate with the same serial is already known. For example in Firefox,…
-
GS2210-48 cisco-like vlan mode
Hi, I was trying to configure some GS2200 to interoperate with our installed switchs, there is a bunch of commands very similar to Cisco IOS, but when executed I get this message (config)# interface port-channel 1,2,3 (config-interface)# switchport mode trunk "VLAN configuration is current not in cisco-like vlan mode" Is…
-
Zyxel - simulation and visualization tool
Hi, I would like to ask, whether Zyxel have got a simulation and visualization tool (packet tracer in different Company)?
-
2 XGS2210-52 and USG 310
Hello, I need Yours help. I bought: - 2 switch Zyxel XGS2210-52 (switch are stacking) - 1 router model Zyxel USG 310 and I have problem with configuration. I need to create 3 vlans (10 for computers, 20 for CCTV, 30 for wifi guest). The Vlans should be isolated, but one computer form vlan 10 shoud manage CCTV and wifi…
-
SSH: Avoid "Write failed: Broken pipe" message when logging out gracefully.
Hi, another request for SSH: Currently SSH clients emit the error message like "Write failed: Broken pipe" or similar when logging out gracefully from a SSH/SFTP session to the switch. This is likely caused by prematurely closing a file handle without announcing a channel shutdown. The error message is confusing/leads to…
-
gs1900-8hp poe budget
Hi, I have 4 POE IP cameras (Power consumption 11.5W each - total 46W ) connected to my gs1900-8hp (which has a power budget of 70W). It also connects to 2 other gs1900-8hp switches and the NVR. So far so good. But when I connect another IP camera (power consumption 12.95W) it doesnt work unless I provide external power -…
-
Issue with P-871M (point-to-point connection)
Hello Team, I have an issue with establishing the connection between two 871m VDSL modems. My conditions: cable length is about 600 meters, the resistance on the line is 307 Om, two 871M modems. DSL indicators were blinking but connection was not able to establish. After I've reset settings to default on both devices the…
-
Faulty Cable?
Hi, I bought two GS1900-8 for home use. One is connected to the router (fritzbox) via port one. Router port is configured for 1Gbit speed. Once I set port 1 in the GS1900-8 to 1000M, full duplex manually I lose connection to the switch immediately. The other switch works fine (different setup though), so I’m not quite…
-
GS1920-24 Roadmap and next Firmware availability
Hello, I´m an owner of 2x 1920-24 Switches and wanted know which new features are on the Roadmap and when you plan to deliver them? I have bought in Beginning of 2014 2x GS1910-24 switches and was bad surprised that these devices where soon (March 2015) after that end of live. As replacement I have then bought the 2x…
-
GS1900-8 web configuration
I have no access to GS1900-8 via http://192.168.1.1/ (always time out!) How to use web configurator? #Biz_Switch_March
-
SYSLOG command information
Hi, how can i configure the switch gs2210-48hp by CLI to send commands messages to the syslog server? I need audit the commands made in switch. The command "syslog type commands privilege <0-14>" is not working in the version 4.30AAHW.
-
Switch 10GBits/s Stackable
Hello,Currently we use the XS3700-24 Switches to connect our 4 servers via SFP+. Unfortunately this model is not "stackable".Which model to use? If not, when will a model be available? Thanks in advance and best regards.
-
VLAN setup on GS-1900-10HP
I want to split this switch into two - 4 ports for video, and 4 ports for everything else, but having problems getting it to work correctly. I create VLAN 10 on ports 1-4, and set those ports to untagged and the other ports to excluded. I then create VLAN 20 on ports 5-8 and set those all to untagged and the other ports to…
-
MES3500-24F DHCP Snooping
DHCP snooping appears to not be working in V4.00(AABG.3) VMES3500-24F_4.00(AABG.1) In global config I have: dhcp snooping dhcp snooping vlan 19,33,89,103 And on my upstream interface I have:dhcp snooping trust The behavior is that clients on untrusted ports DHCP requests on the listed VLANs do not egress the upstream port,…
-
Is there any way to change MTU(Maximum Transmission Unit) on GS1900-8?
Hi all, I recently bought a ZyXel GS1900-8 Switch and now I have got a little problem: I need to change my MTU to 1412 (using hybrid internet connection and can not change it router sided). In the webinterface (newest firmware) I only found the option to set 802.3 maximum fame size, but not setting a custom frame size. Is…
-
GS1900-24 Web GUI Redesign
with the latest release, looks like there has been a refresh on the gui, anyway to change back to the old theme? This one is sorta harsh on the eyes.
-
GS-108S v2 8-Port Desktop Gigabit Ethernet Media Switch
Hi, I bought this model because the seller stated on product page that the product supports the IEEE 802.3ad standard (Link Aggregation). But I don't see it listed in the tech specs on Zyxel website. Can you tell me if the standard is supported or not? #Home_Switch_February
-
Connect 3 GS1920-24HP to USG-310.
Hi all, I own: 3 switches (layer 2, managed, 24 ports) model Zyxel GS1920-24HP; 1 router model Zyxel USG 310. My network is segmented into 10 VLANs (1, 2, 3, 4, 5, 6, 7, 8, 10, 11), the central router routes packets between different VLANs (passing from an SPI firewall), from VLANs to Internet and vice versa (passing from…
