-
NWA210AX not working with POE and NETGEAR GS305P
What do i do wrong. The AP won't work with POE+ with the NETGEAR GS305P. No lights are blinking and the switch says POE fault. I already did a reset but still not working. It does work with a power adapter but not with POE+ Please help/advice. Greetings Victor
-
WAX655E-EU0101F connect to POE
Hi all, I was just reading up on the WAX655E it appears it requires n-type connectors do Zyxel provide POE injectors with n-type connections or is there a way to join an n-type to an rj45? We dont do much work with Outdoor access points so I was just wondering whats the best way to connect them to the network and supply…
-
NWA50AX: WPA3 'Transition Disable' vs. 'Transition Mode'
I know via the CLI one is able to disable 'WPA3 Transition Mode' using the following instructions (https://community.zyxel.com/en/discussion/19058/access-point-feature-to-disable-wpa3-transition-mode-on-ssid-advanced-settings) From my understanding, following the above steps disables 'Transition Mode' so that the Access…
-
Wifi Internet Speed Issue
Hello Zyxel Community, I’ve been using a Zyxel WiFi router to manage my work-from-home setup, which includes video editing tasks on my PC. While the router has been reliable for general usage like browsing and streaming, I’ve noticed a significant issue when working on large video editing projects. Whenever I start editing…
-
MLO in standalone
Hello, I am interested in using the WiFi 7 MLO feature and I am aware that it is available in Nebula. Due to my concern about cloud based management when will MLO be available in standalone mode? Thanks in advance.
-
WAP that could operate in freezing temperature
Hi all, Unusual question, a customer of ours produces frozen goods and has requested additional WAPs NWA210s will work for most of the factory and offices but the storage areas are large walk in freezers (about 0f to -20f) Is there a model of WAP that could survive this?
-
How to achieve better roaming with two NWA50AX APs
Hello! Before I explain details, one point should be put clearly: I am asking about standalone (non-cloud) solutions. Please, do not elaborate about Nebula-solutions. I know about them, but are not going to use them. Reasons below. I have two NWA50AX APs, each connected to separate switch. The switches of both APs are…
-
Safari on MacBook Pro late 2012 with MacOs 10.15.7 does not connect to internet while Chrome does
After renewing my WLAN at home from Wifi 4 (NETGEAR WN203-200PES ProSAFE Single Band Wireless-N Access Point) to Wifi 6E (Zyxel AXE7800 Tri-Band WLAN 6E Access Point | 4x4 in 6 GHz, 2x2 in 5 GHz, 2x2 in 2,4 GHz | Triband (WAX640S-6E)) the Safari browser (v15.6.1) does not reliably connect to the internet anymore, while…
-
Pixel 9 with WiFi7 not connecting at WiFi7 on NWA130be or the 6ghz Band at all.
As the title states…. device will only connect to Wifi 6 and not Wifi 6ghz or Wifi 7,
-
WBE660S no 320MHz Option in Singapore Region ?
I have updated my WBE660S to latest firmware, but when i choose singapore region on 6Ghz the channel bandwidth option only allow me to set 160Mhz , if i change to other region like US it have 320MHz option . Is there anyway to use 6GHz and 320Mhz ?
-
USG310 and USG110 supported AP's for managed mode
Guy's appreciate that these are now discontinued products, but I am trying to get a USG310 with the latest firmware to work as a wlan controller for a NWA-3560-N AP, the AP is also running the latest firmware (I think it was 5.1) and set to managed mode. I have followed the various turorials but I cannot get the AP to work…
-
Which wireless device to setup a 4G failvoer with my XGS1930-28HP switch ?
Hi there, I'm struggling to fnd a compatible 4G access point to setup in bridge fail-over mode with my XGS1930-28HP switch. I have found the LTE7460-M608 which seems to be ok but hard to provision in retailers.. Any advice of product to substitute ? is the Lte7480-m804 a potential fit ? Regards, Alain
-
Real energy consumption - "LTE7490-M904" and "NWA55AXE"
Hi everyone, I wanted to know if anyone knows the real power consumption in Wh for the following products (not the maximum on the specification): LTE7490-M904 NWA55AXE Thanks Guido
-
AP not working
Dear All, I had one switch with two APs connected for several months (no changes made), and everything was working. For several days 1 is working and the other one is not… It blinks green and orange for 1 sec. I've tried connecting directly to the switch and changing the cable, but nothing is working. The device is always…
-
Can a single nwa130be connect to multiple subnets?
Hello, I am thinking about purchasing the nwa130be. I want to use a single access point to access two subnets with different IP Addresses. The nwa130be has two ports so can each port be connected to a different subnet or do I need to trunk the uplink port? Thanks.
-
Fire TV Home Theater not working with Zyxel NWA130BE
Hey, Network Setup: - GS1900-8HP Switch as central switch unit, IGMP Snooping enabled - 2x NWA130BE in Nebula cloud mode - Fritz!Box 7590 (only for DECT) - Opnsense Firewall as router/firewall I'm using a FireTV Stick Max 2nd Gen together with two Echo Studio in Home Theather Mode. When pairing this devices the FireTV…
-
How to add a LAN device to a NWA50AX mesh WiFi
Dear Zyxel team, I have a mesh of 4 NWA50AX, one of which uses its uplink port to connect to the internet modem. All NWA50AX units provide WiFi to connecting stations. I need to connect one station that is not WiFi enabled via LAN. The NWA50AX units' ETH port is labeled "UPLINK". Is it possible to configure this port to be…
-
wifi schedule / NWA50AX PRO ?
Hello, I have a NWA50AX PRO and I am a beginner. Very quick question please: is it possible to program wifi on and off time slots? I haven't seen anything like that in the standalone interface (I don't use the Nebula interface). Thank you very much for your help. JC
-
NWA50AX PRO setting channel auto on 5 GHz radio
Hi all, why can’t I setup auto channel mode during radio 5 GHz configuration? It’s only allowed manual mode, how can I use the best channel for it?
-
Probleme mit Gast-WLAN – Hat jemand ähnliche Erfahrungen?
Hallo zusammen, In den letzten Tagen haben wir bei mehreren Standorten festgestellt, dass das Gast-WLAN nicht funktioniert. Geräte verbinden sich mit dem Netzwerk, erhalten jedoch keine Internetverbindung. Wir haben auch einen betroffenen Access Point vom Modelle NWA1123Cv3, NWA210AX. Hat jemand ähnliche Probleme erlebt…
