-
Phone is connected without internet (NWA50AX)
My phone (Samsung S22 5G) connects to my AP but it does not have internet. It only happens on my AP at home. I can connect to wifi at Walmart, Perkins, etc. I also have an extender connected to my AP which allows my TV in the bedroom to access the internet and there is no issue there. I've looked all through the AP's…
-
Nebula shows 0 client connected
Hello, I have a Nebula organization that uses 6 AP, 5 of them are NWA1123-AC Pro. The last one is WAC6103D-I. All of those are up to date. My problem is that no client are shown in the nebula manager and no traffic logs are shown either. But there are users connected to this. In the past it worked but it doesn't work atm.…
-
Can't get NWA1123ACv3 to work - not accepting default username and password
I am having a frustrating time trying to get a new NWA1123ACv3 to work, i bought several of them. I bought them brand new direct from Newegg, not from an ISP. When i go to the standalone web interface mode, the username "admin" and password "1234" don't work, i get the error message login denied. The quick start guide says…
-
NR5101 with Multy or AP --- what is better
I have a 5G Router (NT5101). The question now is how to cover the house…. A1) I can buy an AP eg NWA500AX, and make a roaming profile in the house… A2) add eg a 2 Pack Multy…. There is not a very big difference in Price but the concept is completely different… Any thoughts please? Note: I have an ethernet "backbone"… ie…
-
What is the difference between the NWA110AX and the WAX510D-E ?
Could you explain me what is the difference between the NWA110AX and the WAX510D-E ? Best regards
-
NWA50AX keep rebooting every 2-3 minutes and I can’t reached web config.
Hi I have ap nwa50ax and it kipping restarting every 2-3 minutes. and I can’t access to web config. When I enter the IP address the web config work some second and the IP address page (the page is not reached) and the ap nwa50ax work fine but can’t open web confg. NCC unlicensed Thanks Advance Have a nice day 💐 Sorry to my…
-
NWA50AX - Clients get "wrong password"
I'm running 3 APs in a Mesh Setup, two of them are wired. After a while mobile clients (iOS + Android) get a "wrong password" at the WPA authentication - although the password is definitely correct. Often a switch off/on heals, but not always. Firmware is up to date. Do you have any ideas or instructions?
-
Is it possible to create offline wifi network ?
By using 5 units of Zyxel NWA1123-AC-PRO device to create a wifi network which does not have any internet connection. Just connected to my local network mainly tablets will use my internal app. I am planning to configure the device in an environment with internet connection then after configuratin I will move to my…
-
NWA5123-AC-HD Power supply and PoE at the same time?
Is it possible to connect Power supply and PoE at the same time? If yes, which has priority? NWA5123-AC-HD is managed and connected to a USG 110. PoE injection came from a POE12-HP
-
How can I add the existing WiFi from AP to my original used from Fritzbox?
I want to use the AP to expand my WiFi from Fritz Box. Actually I have to 2 different WiFi Networks but I want to use as one. Fritzbox and AP by Zyxel are already connected via Ethernet. NWA50 AX Pro I use and Fritzbox 7590 AB Thank you for Support
-
Nebula SSID Layer 2 isolation and network scanners
Hi. I configure Nebula with one AP. The SSID has Layer 2 islolation enabled (with or without Guest Network enabled). Firewall MAC address is the only address added/allowed. Traffic to internet is working fine. Traffic to other physical devices on the the same subnet is blocked/not working as expected (i.e https traffic)..…
-
NWA210/220AX Port Names and Settings
Hi! Neither in the manual nor in the FAQ or community I can find an understandable version how the ports in the NWA210AX/220AX are named and work. Externally they are named "UPLINK" and "LAN1". In Configuration/Network/VLAN/Port Settings only a port named "lan1" can be configured. And there are only two parameters…
-
Access NWA90AX
-
Nwa55axe mesh settings and reconnexion to root ap
Hello, i have an issue with 2 nwa55axe Aps. One is the root connected to ethernet port and Internet connexion. the second one is only used as bridge (no use of ethernet port at the moment. This AP has the first one as root AP and is reachable. Unfortunately, when a power issue occurs (or AP restart). The second one (which…
-
Can't get multiple AP's to run
Hi Community! I have the following components: -Fritzbox 5590 serving as a connection to the internet and as a DHCP -Zyxel XGS1930-28 (non-POE) connected to the Fritzbox -Netgear MS510TXPP (POE) connected to the XGS -NWA210AX times 3 connected to the Netgear When running one AP everything is fine and I can connect to the…
-
Directional Antennas for NWA55AXE?
Hello, I am really enjoying these NWA55AXE Access Points for outdoor deployments. One thing that I think would help is utilizing a directional antenna in some situations. Does anyone have any experience with outdoor directional antennas that they can recommend? I see a bunch of options from Amazon, but am worried about…
-
NWA55AXE ETHERNET PC
Hey, here's my question, as you can see on the photo i have 2 APs ( NWA50AX & NWA55AXE ) 50AX is in the first building and extend the FAI (ISP) Router the 55AXE is in 2nd building, the mesh was nice (200 mbps) and bridge is activated but i can't access the 55AXE by ethernet over a switch GSP1200 -5 V2, the computer doesn't…
-
Manage NWA90AX via USG210
Hi, I have a NWA90AX and NWA90AXE and a USG210. I don't want to use Nebula. I wnat to configure the APs through USG210. On USG210 the AP-Controller is set to manual and the NWA90AX is connected, has a dynamic IP and is reachable. Unfortunately the NWA90AX does not show up in the AP-List on USG210. What am I missing?…
-
handshake fail
Good afternoon, we have a problem with Wi-Fi, very often we cannot connect, some devices connect, others do not. It's been about 2 weeks now. on our NWA90AX, WAX510D
-
Is there a reason to choose WAX650S before WAX640S-6E Modell?
We are using an USG Flex 700 Firewall to manage our APs in our Classrooms (school). We want to replace our old APs with Wifi6 devices. They need to service up to 30 mobile devices at once. Is there a reason to choose WAX650S before WAX640S-6E Modell? THX