-
WAP6807 extender and DX3301 router
Can I use the WAP6807 extender with my DX3301 router? Are they compatible with the EasyMesh / Mpro Mesh system. I need to extend my WiFi signal and I have the DX3301 but I'm not sure that they can work together as mesh WiFi. I already know that the WAP6807 is not a WiFi 6 but is it not so important right now for me. Thanks!
-
NWA50AX L2 Isolation/Intra-BBS
So, I have 5 aps currently setup and am testing. I purchased these units know they did NOT have L2 Isolation but did not know about the Intra-BBS feature (not sure if its a feature available on the NWA50AX.) However, these options are available in the advanced SSID setup in the cloud. I have enabled these features for my…
-
VLAN ID not working
The access point is NWA55AXE. I would like to create a multi SSID access point..I tried to assign a VLAN ID to each SSID Profile but it does not work . Only if I leave VLAN ID =1 the profile allows clients to navigate. The switch has the tagged port where AP is connected with VLANID = 2 and 3. The respective SSID profiles…
-
Wifi Bağlantı Kopma Sorunu
Kullandığım cihaz ile ilgili olarak, telefon üzerinden bağlandığım da hep kopmalar yaşanmakta veri kaybı yaşanmakta bu çok can sıkıcı bi hal almaya başladı bununla ilgi sorunumun giderilmesini rica ediyor Türknet fiber kullanıyorum ama kablo harici bağlantıda sorun yaşıyorum ?????
-
NXC2500 firmware update
Hi Team, We want to upgrade firmware of NXC2500 from V4.22(AAIG.1) to the latest. Please help us to choose the latest firmware. Presently WAC6103D-I are connected to NXC2500. Regards, Pawan kumar
-
iwpriv(kickmac) - question regarding log
Hi community I have 3x NWA1123-ACv2 which are managed via Nebula. They broadcast the same SSID on both 2.4Ghz and 5Ghz. They work very well so far but recently I noticed that my iPad 8th Gen gets regularly kicked by the same AP (the closest one) I found this entry in the logs Station: f4:34:f0:a3:eb:3d has disassoc by…
-
NWA50AX - Any way to schedule radio on/off daily?
As per title my old ubiquiti had a built in function to turn on/off wifi at specific time of the day. Can this be achieved on the NWA50AX standalone (no nebula)? Thanks
-
NWA55AXE mounting height
Hello, I purchased two NWA55AXE. I wish to connect (wirelessly) two buildings about 65-70 meters apart. There is only one tree that obstructs the direct line of sight. But my questions are:1. Will distance be a problem? 2. On the important question - at what height is it best to mount the two APs? Greetings.
-
How do you disable Client Isolation/AP Isolation checkbox.
How do i disable Client Isolation/AP Isolation checkbox.
-
Download speed slows down after a while on wifi but not on ethernet.
Hello,I have a problem with my home network. I have a fritzbox 7530 router form my ISP and get the full speed there. If i try that on my network it works sometimes, but more often than not it slows down a lot. Like from 25Mbit/s to like .5Mbit/s. I built my homenetwork with some equipment I had l lying around. I have a…
-
WAX6xx-6E (Wi-Fi 6) customer notes / discussion
1) Both the WAX620D-6E and WAX640S-6E are Nebula Cloud managed, Controller-managed, and Standalone. Not yet supported in the USG Flex 500. 2) The WAX620D-6E and WAX640S-6E support the FCC extension of the 5Hz band (5.15 to 5.35 GHz; 5.470 to 5.850 GHz instead of 5.15 to 5.35 GHz; 5.725 to 5.850 GHz3) The 5GHz and 2.4GHz…
-
ZyXEL USG AP Firmware List empty
Since upgrading the USG Flex 100 from V5.21 to V5.30, the AP firmware list is empty (configuration > wireless > AP Management > Firmware).In the AP List (configuration > wireless > AP Management > Mgmt. AP List) I see my AP (WAX510D with 6.30(ABTF.3)) and the firmware status says update availiable. But an upgrade is not…
-
Minimum Equipment Necessary For ZyMesh
If I want to set up a simple mesh wifi network using NWA55AXE outdoor access points, what all do I need? Can I set it up with just the access points, or do I need another component. Another component other than a router. Does the router need to be a Zyxel brand and particular variety? Thanks, Tom
-
Is it possible to operate a Zyxel NWA55AXE AP as a Wifi repeater without a second Zyxel device ?
I would like to operate the Zyxel NWA55AXE AP only as a repeater, purely via Wifi (without LAN) with a Telekom router without a second Zyxel device is that possible? Or do I need a second Zyxel device connected to LAN as a bridge?
-
How to see the list of current WIFI clients for NWA50AX in standalone mode?
Hello, allI'm trying to find the list for showing all WIFI clients (MAC and etc.) on my NWA50AX. It didn't mentioned it anywhere on how to do it in standalone mode. Nebula cloud seems to support such function if I understand it correctly? But internet connection is not always available to this network. It seems like a very…
-
NWA50AX iPhone saying the password was wrong
This discussion was created from comments split from: NWA50AX + Nebula WIFI password is rejected, iPad,Iphone.
-
NXC 5500 specification confirmation
Hello, we will use 200 access points in our construction. We cannot use nebula due to regulations. It will be a build onpremises using the Controller. I am looking for answers to the following questions with this information. Answer 1: Access points must work in tunneled mode with the controller. How many access points can…
-
[Notification] NWA50AX, NWA90AX, NWA55AXE Smart Mesh Station can't get IP Issue
Issue Description: When a user activates Smart Mesh, stations that connect to the AP may not get the IP address. Scenario 1. When activating Smart Mesh in Nebula, Repeater AP has connected to Root AP, then clients can't get IP addresses under both Root AP and Repeater AP. Scenario 2. When activating Smart Mesh in Nebula,…
-
NWA210AX - Transmit Power 5GHz low
I have a perplexing problem. Not sure if there is a support process, but wanted to poll the community for answers. The NWA210AX is set at 30dBm max power for 5GHz channel. I understand it can't transmit that much power, but the datasheet says for US, 25dBm is the rated output power for 5GHz. Why is it dropping to 16dBm??…
-
Feature request: add hostnames to the Station Info page
I'm using my Zyxel in standalone and find the Station Info page very helpful. However I admit it would be even more helpful if I could see the hostname of the device reported not only IP/mac address. Can this be considered please? Thanks
