-
WAC6502D-E -> experience with?
Hi I cant wait for a Trial Model I have to ship one AP fast to a remote location. Later I will build a Zyxel Hotspot System. Can the AP run as Standalone? I found no info inside the Partner Portal beside of this existence... And this Thai Video with somce Screenshots: https://www.youtube.com/watch?v=PfTR9zMczbM Thanks
-
Roaming
Zyxel statement about roaming: To set a roaming environment, APs need to use the same SSID, subnet(DHCP server),security settings and the coverage of these APs is overlapped. My question is: Is there a simple way or test to see that the APs coverage is overlapped? And how fare should the overlap be? It is a simple…
-
Disconnects from LAN NWA1123-ACv2
We have several offices. We use NWA1123-ACv2 and NWA1100-NH access points. With NWA1100-NH, all is well, good. But NWA1123-ACv2 access points periodically disconnect from the local network under load, for example, if they allow a lot of traffic to pass through, or volumetric content is being downloaded (YouTube, etc.). We…
-
Problem with iPhone and NWA1123-ACv2
Hi guys, Have a customer who use NWA1123-ACv2 - 3 pcs. Home network, mostly used for 4-5 pcs Apple and few Adroid devices. Generally everything work fine, speed is ok, but!The problem occurs without any reason, only on iPhones. He came back from work, first connection to the system, everything is fine. After a while, the…
-
WAC6552D-S with ZyWall
Hello I have a question concerning the WAC6552D-S Access-Points. We want to use 3 pcs with a ZyWall 110 as managed APs. The Zywall detects the Access Points and shows them in the Controller menu, but the Access Points do not switch into "Managed AP mode", the Status page keeps saying that the access point is still in…
-
WAC6303D-S the best for a smal Hotspot System?
Hi We have 4 Floors and need a Hotspot System. Since I have to buy everything new it must work. I dont know which Zyxel Router I will buy yet. I looking for the WAC6303D-S the look the newest one. For switch this one: GS2210 with an centralised Management. I will not hany any cloud sshhtt. The Amy dont need to know what my…
-
LED suppression disabled after reboot
Hi I have two WAC6503D-S connected and managed by a ZyWall VPN 100. After the system is up (the ZyWall and the both AP's), I set the "LED suppression on" on Monitor\Wireless\AP Information\ @ each AP. It works well, the LED's are off. When I reboot the AP's, the LED's are flashing during startup, what is fine. But after…
-
nxc-2500 change psk key with cli
Hello! over telnet after login ... configure terminal wlan-security-profile guest_sec wpa-psk blablablablawrite exit become the wpa-psk changed and on the gui correct showed but wlan login dont work.I think i need some as "apply" on the cli ?on the gui, after wlan-psk rewrite and "OK" then works ...Thanks in advance...
-
How to switch WAC AP to Nebula from on-premises controller
This article is shown you how to switch AP to Nebula from on-premises controller. Please follow these steps to migrate your AP to the cloud and enjoy managing your network anywhere and anytime. Apply to WAC6103D-I, WAC6502D-E, WAC6502D-S, WAC6503D-S, WAC6552D-S, WAC6553D-E Step1: Go to Nebula Control Center to register…
-
WAC5302 constantly rebooting
Hello We have the following setup in a customer installation Zywall USG-40 as AP controller for 6 WAC5302 Accesspoints. A additional 4 AP license is installed on the USG. Firmware for the USG is V4.33(AALA.0) Firmware on the accesspoints is V5.00(ABFH.5) The accesspoints are rebooting every 2..3 minutes. In the logs, I get…
-
Reboot remotely a LTE3301-Q222
Hi,I'd like to be able to reboot remotely a LTE3301-Q222 via Wi-Fi but I cannot figure out how to do that. I tried to connect with telnet but I don't know the password. I tried the default password and the admin password but none of them work. How could I do that?
-
Printer can't join the network?
Hi all I have several networked build with WAC6103. Some location setup with an USG60/110/310 and some with NXC2500. There is the same issue all over. If I take a printer (HP PageWide, Epson, Canon etc, etc) and trys to connect it, it fails.The HP PageWide gives most details - That Its see the same network name on more…
-
NWA1123-AC: What's username/password?
I have a NWA1123-AC with firmware version V2.12(AAOX.0). I backed up my config, but after reloading it my personal username and password don't work anymore. Neither do the default credentials, as in admin/1234. What's going on? They only way out it seems is by resetting the device, but that's defeating the purpose of being…
-
NWA1123-ACv2 Roaming configuration
Hi, I have two NWA1123-ACv2 - how can I configure roaming so I do not need to disable / enable wifi to get to the strongest AP connected? Thanks! Best regards #Biz_Apr_2019
-
QOS on VMG1312-B10D for SIP trunks
Hello trying to set up QOS for SIP trunks on this router but when trying to set up the classifier if I select the VDSL interface it locks up the classifier section so the only way I can then access it again is to default the router. Could be something i'm doing as i'm not 100% sure on how to set up the QOS correctly on…
-
samsung mobile phone (j7, S7) and iphone do not receive or send multimedia files by WAC6503D-S, what
I bought about 16 WAC6503D-S access points, I configured a 2.4Gh network and a 5Gh network.Testing with huawei mobile I have no problem, when I connect a samsung device (J7 Prime and S7 Edge), I do not download any multimendia file, the same thing happens with Iphones.I thought it was going to be some problem with the WIFI…
-
Cannot connect to NXC2500 via 192.168.1.1
I cannot connect the NXC2500 to my computer via 192.168.1.1 even after I reset the unit. I tried from port 1 to port 6. Error message : This site can’t be reached
-
WPA3
The Wi-Fi Alliance announced WPA3 a few months ago, a Wi-Fi security standard that will replace WPA2. When it will be able on current Zyxel devices? Is it on the roadmap?
-
Single-channel wifi design instead of standard multi-channel
Hi, I'm interesting in another wifi design than classic. Standard design with APs managed by WLC use different channels (e.g. for 2,4GHz ch.no. 1, 6 and 11) which alternates from one AP to the second. This design is very usefull, if wifi-clients don't move too much or too quickly. But if wifi client moves, especially if it…
-
IGMP / Wireless /
Dear Zyxel. I am not sure it's the correct question in the switch section but let's see.. Maybe it's a dum question but that is caused by lack of experience with this scenario. Normally with IPTV you have this topology What now when i have the possibility to connect my TV(setup box) wirelessly to the topology like this:…
