how do i access NWA3560-n GUI ?

jenbo
Posts: 1
i have a NWA3560-n and it seems to have FTP, SSH, HTTP and HTTPS open but i cant connect to it ..FTP and SSH just gives me a command promt and http and https does nothing.. i have it connected to my local router so it gets a DHCP address and thats about it .. NO wifi is enabled on the NWA3560-n so i cant access it that way ether ..i dont understand what im doing wrong
0
All Replies
-
Your browser maybe don't trust the kind of TLS/HTTPS protocol your AP is providing.Or... if you have it as used device from another setup, maybe it's still part of a managed set of APs.So maybe... need a reset before have access?
0 -
Hi @jenbo
Please test the process below, and you can access the web GUI of your NWA3560-N
1. Push the reset button of your AP
2. Upgrade your AP's firmware to the attached file through FTP
(You can follow the URL below as reference, the approach can be also applied to to 3560N)
> https://kb.zyxel.com/KB/searchArticle!viewDetail.action?articleOid=016149&lang=EN
After firmware upgrade, your AP should broadcast Wi-Fi signal, and allow HTTP/HTTPS access!
Best Regards,
Richard0
Categories
- 8.5K All Categories
- 1.6K Nebula
- 71 Nebula Ideas
- 57 Nebula Status and Incidents
- 4.5K Security
- 226 Security Ideas
- 983 Switch
- 46 Switch Ideas
- 878 WirelessLAN
- 22 WLAN Ideas
- 5.2K Consumer Product
- 157 Service & License
- 280 News and Release
- 59 Security Advisories
- 13 Education Center
- 580 FAQ
- 263 Nebula FAQ
- 160 Security FAQ
- 76 Switch FAQ
- 74 WirelessLAN FAQ
- 7 Consumer Product FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 69 About Community
- 46 Security Highlight