how do i access NWA3560-n GUI ?
Options
jenbo
Posts: 1
i have a NWA3560-n and it seems to have FTP, SSH, HTTP and HTTPS open but i cant connect to it ..FTP and SSH just gives me a command promt and http and https does nothing.. i have it connected to my local router so it gets a DHCP address and thats about it .. NO wifi is enabled on the NWA3560-n so i cant access it that way ether ..i dont understand what im doing wrong
0
All Replies
-
Your browser maybe don't trust the kind of TLS/HTTPS protocol your AP is providing.Or... if you have it as used device from another setup, maybe it's still part of a managed set of APs.So maybe... need a reset before have access?
0 -
Hi @jenbo
Please test the process below, and you can access the web GUI of your NWA3560-N
1. Push the reset button of your AP
2. Upgrade your AP's firmware to the attached file through FTP
(You can follow the URL below as reference, the approach can be also applied to to 3560N)
> https://kb.zyxel.com/KB/searchArticle!viewDetail.action?articleOid=016149&lang=EN
After firmware upgrade, your AP should broadcast Wi-Fi signal, and allow HTTP/HTTPS access!
Best Regards,
Richard0
Categories
- All Categories
- 397 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 78 Nebula Status and Incidents
- 5.1K Security
- 52 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 70 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 211 Service & License
- 332 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 880 Nebula FAQ
- 415 Security FAQ
- 221 Switch FAQ
- 195 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 63 Security Highlight