What to upgrade to from Multy WSQ50TWIN

Ohenriquez65

I've been running a mesh m1 system at home for a few years now, and it had worked great. However I need to be able to run Wi-Fi 6 now.

what do you recommend for my next system? I have 1gb fiber internet and the setup I have currently works great, but need Wi-Fi 6

Zyxel_Jerry

Hi @Ohenriquez65

Are you considering Wi-Fi 6 or Wi-Fi 6E for your network environment? While Multy M1 does not support Wi-Fi 6E, it does support 802.11ax. If your wireless client is compatible with 802.11ax, simply connect to the Multy M1 SSID to establish a connection using the 802.11ax protocol.

Ohenriquez65

I need the latest WiFi 6e or 7 if it is available. Any recommendations? Also is my current multy wsq50 compatible with the setup you are describing?

Zyxel_Jerry

Hi @Ohenriquez65

Multy X support wireless 802.11a/b/g/n/ac, WSQ50 Multy X does not support WiFi 6e or 7 , if you need Wi-Fi 6E mesh product, you can consider NWA220AX-6E.
https://www.zyxel.com/global/en/products/wireless/802-11ax-wifi-6e-dual-radio-poe-access-point-nwa220ax-6e

Ohenriquez65

hey Jerry, thanks for the response, but will I be able to connect one of the NWA220AX-6E with the existing multy system I have? Or will I need to get two new NWA220AX-6E systems ? I need to know interoperability please.

Zyxel_Jerry

Hi @Ohenriquez65

Multy model can only do mesh with the same model.
Here is table list in the User Guide. Page10 Table2

For more information about NWA220AX-6E, you can refer to the article below
https://www.zyxel.com/global/en/support/download?model=nwa220ax-6e

https://community.zyxel.com/en/discussion/10160/nebula-how-to-extend-wireless-coverage-by-configure-smart-mesh