Access Multiple network throught Zywall IPSec VPN Client






Hello,
We have a USGFLEX200 device with the local networks of the following scenario:
- Network 192.168.10.0/24
- Network 10.80.10.0/24
- Network 10.90.10.0/24
- Network 172.26.0.0/24
We use the VPN Client IPSec_3.8.204.61.32 as a connection. We need access to the different networks from this client, but we do not want traffic from each VPN client to the Internet to pass through the USGFLEX200.
We cannot access the different networks without having to activate all the VPN client traffic through the USGFLEX200
We need to access only the indicated networks without having to divert all traffic from the VPN client through the USGFLEX200.
Thank you,
Juan Antonio.
All Replies
-
Hi @Infosetel2020,
For IPSec VPN client, you can choose split tunnel for one lan subnet only.
You can also use Windows native client to achieve the goal by adding routes on Windows client.
Click here to start: https://bit.ly/46UJJCE
Emily1
Categories
- All Categories
- 300 Beta Program
- 1.9K Nebula
- 103 Nebula Ideas
- 72 Nebula Status and Incidents
- 4.8K Security
- 4 USG FLEX H Series
- 242 Security Ideas
- 1.1K Switch
- 54 Switch Ideas
- 807 WirelessLAN
- 29 WLAN Ideas
- 5.5K Consumer Product
- 178 Service & License
- 309 News and Release
- 69 Security Advisories
- 19 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.3K FAQ
- 556 Nebula FAQ
- 349 Security FAQ
- 118 Switch FAQ
- 147 WirelessLAN FAQ
- 33 Consumer Product FAQ
- 114 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 70 About Community
- 56 Security Highlight