[NEBULA] SNMP Management

ZeRicardo

I enable SNMP in NCC and add Zyxel MIBs (supplied by Zyxel support team) to my NMS system.

I can get some metrics (not all) from MIB only for NSG, but not from NAP and NSW.

What is possible to manage over NCC SNMP access? 

flottmedia

@Nebula_Chris: could you please let us know the result of the eITS discussion here afterwards. The SNMP details would be also relevant to us ...

Zyxel_Chris

Hello @ZeRicardo
Noticed that you also open the ticket on eITS, for this issue I will help to notify and reply you through the eITS channel.

/Chris

Antonio_Studerus

Hello Chris and Ze Ricardo

Please share the results of the eITS ticket also in this forum.

Antonio

Zyxel_Chris

Hi,
We found out NAP somehow didn't apply SNMP configuration in the first place, the setting has applied after re-activate SNMP, issue gone in current status, will keep monitor.
Please feel free to let me know if anyone got the same issue of it.

/Chris

flottmedia

@Nebula_Chris: We would still be interested in an answer to the following question of @ZeRicardo:

What is possible to manage over NCC SNMP access? 

Ist there any documentation what is possible (and what not) on SNMP side when working in NCC mode with NAW, NSG and NSW devices?

Zyxel_Chris

Hi @flottmedia
NCC support read-only in current stage, if you are asking which kind of community strings we have support on SNMP.
I can help to put this thought in idea selections if you need the trap and read-write on SNMP.

P.S: Feel free to PM me if you need the MIB file.

/Chris

JCKelly

Does NSW100-28P support SNMP? If so, how do I add the feature? I've got a few of these in stock, but we were never able to figure out how to get SNMP running. It would be great if we could get these working with Domotz to get network maps. Failing that, does anyone want to buy them? I have two or three that were never opened and one in use in our lab.