Channel selection

Bishop527

Good Morning,

Is there a way I can get some of my wifi clients to connect to certain channels to relieve channel congestion in Nebula? For example some to channel 1 some to channel 6 and some to 11? Also explain the TAG feature in Nebula?

Thank you in advance.

Zyxel_Judy

Hi @Bishop527 ,

You can only choose the channel for the AP, not for wireless clients. The method for selecting the channel for the AP is outlined below. However, we recommend configuring DCS (Dynamic Channel Selection) to allow the AP to scan and automatically choose the optimal channel.

You can find an explanation & configuration of the TAG feature in this FAQ:

https://community.zyxel.com/en/discussion/20201/how-to-configure-unique-ssid-on-specific-access-points-on-nebula

Zyxel_Judy

Hi @Bishop527 ,

You can only choose the channel for the AP, not for wireless clients. The method for selecting the channel for the AP is outlined below. However, we recommend configuring DCS (Dynamic Channel Selection) to allow the AP to scan and automatically choose the optimal channel.

You can find an explanation & configuration of the TAG feature in this FAQ:

https://community.zyxel.com/en/discussion/20201/how-to-configure-unique-ssid-on-specific-access-points-on-nebula