Channel selection
Freshman Member
Good Morning,
Is there a way I can get some of my wifi clients to connect to certain channels to relieve channel congestion in Nebula? For example some to channel 1 some to channel 6 and some to 11? Also explain the TAG feature in Nebula?
Thank you in advance.
Accepted Solution
-
Hi @Bishop527 ,
You can only choose the channel for the AP, not for wireless clients. The method for selecting the channel for the AP is outlined below. However, we recommend configuring DCS (Dynamic Channel Selection) to allow the AP to scan and automatically choose the optimal channel.
You can find an explanation & configuration of the TAG feature in this FAQ:
Zyxel_Judy
0
Zyxel Employee
All Replies
-
Hi @Bishop527 ,
You can only choose the channel for the AP, not for wireless clients. The method for selecting the channel for the AP is outlined below. However, we recommend configuring DCS (Dynamic Channel Selection) to allow the AP to scan and automatically choose the optimal channel.
You can find an explanation & configuration of the TAG feature in this FAQ:
Zyxel_Judy
0
Categories
- All Categories
- 442 Beta Program
- 3K Nebula
- 234 Nebula Ideas
- 6.7K Security
- 693 USG FLEX H Series
- 365 Security Ideas
- 1.8K Switch
- 87 Switch Ideas
- 1.4K Wireless
- 56 Wireless Ideas
- 7.1K Consumer Product
- 312 Service & License
- 508 News and Release
- 97 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 5.1K FAQ
- 34 Documents
- 89 About Community
- 114 Security Highlight
