NSA220 Plus Drive Replacement
Options
xrobc
Posts: 1 Freshman Member
Hi
I have an NSA220 Plus box that I've been using for several years quite happily.
Recently I purchased two new 2TB Seagate hard drives to fit in and replace the old 1tb discs (in a paired raid) that were now full.
However, when I replace the drives I am unable to get the box to start up. The new drives have been initialized in Windows prior to installing them in the NSA Box, but have not been partitioned or formatted.
If I put the original drives back in then the device works fine.
Any suggestions?
Thanks
Rob
#NAS_February
I have an NSA220 Plus box that I've been using for several years quite happily.
Recently I purchased two new 2TB Seagate hard drives to fit in and replace the old 1tb discs (in a paired raid) that were now full.
However, when I replace the drives I am unable to get the box to start up. The new drives have been initialized in Windows prior to installing them in the NSA Box, but have not been partitioned or formatted.
If I put the original drives back in then the device works fine.
Any suggestions?
Thanks
Rob
#NAS_February
0
Comments
-
Hi,
NSA220-Plus is only supported max 3TB for 2 1.5TB hard disk installed.
You can download release note from Zyxel and see the information.
ftp://ftp2.zyxel.com/NSA-220_Plus/firmware/NSA-220 Plus_3.25(AFG.0)C0.zip
0
Categories
- All Categories
- 383 Beta Program
- 2.1K Nebula
- 116 Nebula Ideas
- 80 Nebula Status and Incidents
- 5.1K Security
- 76 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 907 WirelessLAN
- 34 WLAN Ideas
- 5.9K Consumer Product
- 209 Service & License
- 335 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.9K FAQ
- 890 Nebula FAQ
- 415 Security FAQ
- 233 Switch FAQ
- 203 WirelessLAN FAQ
- 46 Consumer Product FAQ
- 137 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 73 About Community
- 62 Security Highlight