NAS326 RAID

NAS326

Hi all,

I have a question related to RAID 1 on my NAS326. 
I had initially one HDD and after 3 months of usage I have added the second one. I've sync them on RAID 1 but in Overview, Volume on RAID is see "No Volume".
But in HDD section i see both hard drives and says "Disc Group 1 (raid 1).

See the below image.

My question is, do I have the HDD in RAID 1 or not? Why does it says No Volume on RAID?


#NAS_Aug_2019

Mihawk

It is normal, because you're used disk group to create the volume.


So, you need go to Disk Group to check its RAID Type.


Also, you can see it on Hard Disk.


Here is the description of user's guide about internal storage.
https://www.zyxel.com/support/download_landing/product/nas326_22.shtml?c=gb&l=en&pid=20150327120001&tab=User_s_Guide&pname=NAS326

Mihawk

It is normal, because you're used disk group to create the volume.


So, you need go to Disk Group to check its RAID Type.


Also, you can see it on Hard Disk.


Here is the description of user's guide about internal storage.
https://www.zyxel.com/support/download_landing/product/nas326_22.shtml?c=gb&l=en&pid=20150327120001&tab=User_s_Guide&pname=NAS326

NAS326

Thank you!