Need help installing 4.70 firmware to NSA320

seiji_k · May 2020

Thanks to your help, I'm now able to revive my NSA320!

For the benefit of others who might ran into the same situation as me, I've outlined what I did:
1. Did a factory reset of the NAS
2. Used rescue stick image containing 4.50 firmware to boot the NAS
3. Using the web interface, I upgraded the firmware to 4.70, which I downloaded from Softpedia
4. After the firmware upgrade, I created a fresh volume using the web interface
5. Using a FTP client, downloaded the 4.70 packages
6. Copied the packages to the admin \ zy-pkgs folder share

From then on, I'm able to configure the NAS and install packages.

pepev82 · April 2

Dear all,

I need some help to fix my NSA-320 device.

Sympton: cold start with power button: all led's are lights up and standstill, 2-3 sec later fan is start then another 3-4 sec and there is activity on the LAN conector but can not see on the network.

Is there any idea about this fault? Hardware or software issue?

I tried download the above rescue disk, but link are not working, and can not find any cached site on the web.
May i get a copy of that usb image, please ?

Many thanks in advance. Any help is much more than appreciated.

Peter