[NEBULA] InterVLAN routing

MartyWalter
MartyWalter Posts: 32  Freshman Member
First Anniversary 10 Comments
edited April 2021 in Nebula
I need to route between Lan1 and Vlan7.

Lan1 Gateway 10.77.98.148
Lan1: 10.77.98.0/24

VLAN7 Gateway: 172.16.0.1
VLAN 7: 172.16.0.0/24

I have tried to set up a static route:
Type: Intranet
Protocol: Any
Source IP: 10.77.98.0/24
Source Port: Any
Destination IP: 172.16.0.0/24
Destination Port: Any
Next Hop: 10.77.98.148

I am able to ping IP addresses between networks, just not able to route data (i.e. web traffic between computers and PBX)

All Replies

  • Zyxel_Chris
    Zyxel_Chris Posts: 653  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    May I know if these 2 IPs are in the NSG or not, can you share your topology for me (you can post here or PM me)
    Is your issue that phone cannot register to the server, I assume that your phone and server are in these LANs (LAN1 and VLAN7)?
    Chris
  • Zyxel_Chris
    Zyxel_Chris Posts: 653  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    I will PM you about the organization access privilege, please be aware the Inbox message.

    Chris
  • Pook
    Pook Posts: 136  Ally Member
    First Anniversary 10 Comments Nebula Gratitude Friend Collector
    What was the fix?
  • Zyxel_Chris
    Zyxel_Chris Posts: 653  Zyxel Employee
    First Anniversary 10 Comments Friend Collector First Answer
    Because I didn't receive the response from this user therefore the root cause is unclear.

    Chris

Nebula Tips & Tricks