ZyWall USG2000 FW 3.30(AQW.7)C0 gets "Unable to connect ZySH daemon", WebGUI won't work

hansjalbertsson
hansjalbertsson Posts: 34  Freshman Member
Friend Collector First Comment
edited April 2021 in Security
ZyWall USG2000 FW 3.30(AQW.7)C0 gets "Unable to connect ZySH daemon" when in ssh as admin, WebGUI won't work.

What do I do to get it working, and what could be the reason??

Accepted Solution

«1

All Replies

  • Blabababa
    Blabababa Posts: 151  Master Member
    First Anniversary Friend Collector First Answer First Comment
    Is it all the time showing "Unable to connect ZySH daemon" or just in short period? If it just showed in short period, could be the system just busy on handling something else for minutes. 
  • hansjalbertsson
    hansjalbertsson Posts: 34  Freshman Member
    Friend Collector First Comment
    Mark said:
    Dear @hansjalbertsson
    I would suggest you flash the usg with the latest Weekly firmware available:
    ftp://cpeguest02:cpe2005@ftp.zyxel.de/USG_3.00_weekly_date_code/V330_based_2016/2016-WK48/USG2000/330AQW7ITS-WK48-r74988.zip 

    Basicly FTP upgrade would be advisable. 

    So connect a pc in your local lan wired to the usg
    start a command prompt with admin rights 
    then type ftp [zywalls ip address] and login with admin and password



    Then if successful , set the mode to BINIARY with the command : bin
    after that give the command put c:\firmware.bin [location where firmware is downloaded]



    Hit enter and it will start the firmware upgrade..
    Let me now if you have any questions ! 

    Kind regards
    Mark


    This is close, there's actually a document from zyxel that addresses this. This will be part of the fix.

  • hansjalbertsson
    hansjalbertsson Posts: 34  Freshman Member
    Friend Collector First Comment
    It's a permanent state. 


  • hansjalbertsson
    hansjalbertsson Posts: 34  Freshman Member
    Friend Collector First Comment
    Mark said:
    Dear @hansjalbertsson
    I would suggest you flash the usg with the latest Weekly firmware available:
    ftp://cpeguest02:cpe2005@ftp.zyxel.de/USG_3.00_weekly_date_code/V330_based_2016/2016-WK48/USG2000/330AQW7ITS-WK48-r74988.zip 

    Basicly FTP upgrade would be advisable. 

    So connect a pc in your local lan wired to the usg
    start a command prompt with admin rights 
    then type ftp [zywalls ip address] and login with admin and password



    Then if successful , set the mode to BINIARY with the command : bin
    after that give the command put c:\firmware.bin [location where firmware is downloaded]



    Hit enter and it will start the firmware upgrade..
    Let me now if you have any questions ! 

    Kind regards
    Mark


    I guess I should say

    ftp> put 330AQW7ITS-WK48-r74988.bin  /Firmware

    because I think the usg looks for the bootable FW in /Firmware, doesn't it?

    Ftp from windows doesn't work!!!??? Any ftp from any of my Unix machines seems to work OK.


  • [Deleted User]
    [Deleted User] Posts: 118  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment
    Dear @hansjalbertsson

    No this is not needed If above does not work for you it seems more alike a local issue on your pc.. (firewall, anti virus,software) what is causing an error...  you can also use on your  windows client  a software tool like FILEZilla.. there  you just connect again with the usg en drag en drop the bin file directly in the root .. This is also applicable to almost all our modern firewalls, Acces points, wireless controllers and home routers/modems
  • hansjalbertsson
    hansjalbertsson Posts: 34  Freshman Member
    Friend Collector First Comment
    Why is then the old firmware in there named /Firmware??
  • hansjalbertsson
    hansjalbertsson Posts: 34  Freshman Member
    Friend Collector First Comment
    Re ftp not working: FileZilla works very well.
    PROBABLY I have some issue with my W10 firewalls, I am NOT a Windows person.


  • [Deleted User]
    [Deleted User] Posts: 118  Zyxel Employee
    First Anniversary Friend Collector First Answer First Comment
    i guess you are pointing to the standby firmware? but then again i am 100 % sure what is said.. I do like daily upgrading cases with ftp. you can also check our one security site:
    http://onesecurity.zyxel.com/tutorials
    then under [Firmware Upgrade Procedure] you can find a document where you can see the same


  • hansjalbertsson
    hansjalbertsson Posts: 34  Freshman Member
    Friend Collector First Comment
    And this is true even in a USG2000 ???

Security Highlight