NSA325v2 does not boot after FW update
Freshman Member
I know others ran into same issue that after FW update the NAS is not accessible anymore.
Nearly found issue as in some boot issue, but the required files are not downloadable anymore. Can anyone help me in the correct files in solving this issue?
Bit more background: system led is blinking continuously, Twonky works so DHCP/IP works, NSU does not show NSA and connecting to drives is not possible anymore.
Did all sorts of resets like described elsewhere, including online version, even removed disks and boot. Prepared a FAT32 USB with 481AALS1C0.bin on it, but lack folder/name details. Ordered serial cables already, just in case (read some articles).
It looks similar as <https://homeforum.zyxel.com/discussion/444/nsa325v2-not-working-after-firmware-upgrade#latest> but resetting does not work.
#NAS_Sep
Accepted Solution
-
As I rethought my question it does not make sense. Having IP connectivity means no boot issue, but some config mistake. Decided to do another full system reset and this time it continued, making the NAS visible again. Sometimes you need to rethink stuff by writing things down...
0
Categories
- All Categories
- 164 Beta Program
- 1.7K Nebula
- 86 Nebula Ideas
- 62 Nebula Status and Incidents
- 4.7K Security
- 236 Security Ideas
- 1.1K Switch
- 50 Switch Ideas
- 908 WirelessLAN
- 27 WLAN Ideas
- 5.3K Consumer Product
- 172 Service & License
- 294 News and Release
- 65 Security Advisories
- 14 Education Center
- 911 FAQ
- 399 Nebula FAQ
- 249 Security FAQ
- 90 Switch FAQ
- 100 WirelessLAN FAQ
- 18 Consumer Product FAQ
- 55 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 68 About Community
- 51 Security Highlight
Consumer Product Help Center
FAQ