NSA325v2 doesn't work
Options
Comments
-
Can i recover this?
Maybe. Depends on why the Debian install failed. You'll need to hook up a serial cable to find out. That should be a 3.3V TTL cable. The easiest way is an USB 3.3V TTL cable like this, but I know also of people who used the serial port of their Raspberry Pi. Anyway, only connect GND,TX and RX. Not Vcc.
1 -
Thank you for your help. I think i have this cable, or similar, i buyed it for playing with android boxes. I'll try tomorrow and will reply.0
-
Hello. Now i have connected NSA via serial to my Raspbian (in the VM) and tryed to install Debian like here https://web.archive.org/web/20180423050001/http://zyxel.nas-central.org:80/wiki/Debian_on_325
But at end i become a message "Bad Magic Number", NSA is no booting from the USB.0 -
Can you provide a full bootlog?
0 -
Hmmm, how can i mark and copy a whole bootlog (using "screen"? Because i can only see last 15 rows.(I managed to boot the original firmware, am not sure how)0
-
Don't know. Doesn't your terminal emulator have a log option?
0
Categories
- All Categories
- 398 Beta Program
- 2.1K Nebula
- 117 Nebula Ideas
- 83 Nebula Status and Incidents
- 5.2K Security
- 99 USG FLEX H Series
- 247 Security Ideas
- 1.3K Switch
- 69 Switch Ideas
- 923 WirelessLAN
- 35 WLAN Ideas
- 5.9K Consumer Product
- 212 Service & License
- 337 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 2.1K FAQ
- 1K Nebula FAQ
- 445 Security FAQ
- 238 Switch FAQ
- 213 WirelessLAN FAQ
- 47 Consumer Product FAQ
- 142 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 72 About Community
- 62 Security Highlight