Problem with two external HDD
vinprom
Posts: 15
Freshman Member
Freshman Member
When I add two external USB hard drives (I use the rear USB ports) and I want to back up from NAS to external drive 2 via the Copy/Sync button, the external drive 2 does not appear in the USB volume drop down list, only drive 1 is visible and able to choose.
Initially, the two drives are visible in Storage Manager> External Volumes, but after a while, one disappears ...
I can not fully use 2 external USB hard drives at the same time
#NAS_Jan_2019
Initially, the two drives are visible in Storage Manager> External Volumes, but after a while, one disappears ...
I can not fully use 2 external USB hard drives at the same time
#NAS_Jan_2019
0
Comments
-
Is it a dual disk problem, or is the 2nd disk the problem. What if you only connect the 2nd disk?
0 -
As far as I heard from, the usb stick with copy, it would only detect the latest one you plug into USB, so may need to plug in again the drive 2.0
Guru Member
Ally MemberCategories
- All Categories
- 199 Beta Program
- 1.8K Nebula
- 94 Nebula Ideas
- 63 Nebula Status and Incidents
- 4.7K Security
- 236 Security Ideas
- 1.1K Switch
- 52 Switch Ideas
- 919 WirelessLAN
- 28 WLAN Ideas
- 5.4K Consumer Product
- 173 Service & License
- 296 News and Release
- 65 Security Advisories
- 14 Education Center
- 1K FAQ
- 454 Nebula FAQ
- 258 Security FAQ
- 100 Switch FAQ
- 115 WirelessLAN FAQ
- 22 Consumer Product FAQ
- 70 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 69 About Community
- 52 Security Highlight
Consumer Product Help Center
FAQ