Link Aggregation when using Qnap D4
alexxx
Posts: 3 
Freshman Member
Freshman Member
Hi. Please tell me, what option do I choose to combine ports on switch (Zyxel GS1200-8) and on NAS storage (Qnap D4)? I need to improve storage performance.Thanks
#Home_Switch_Aug_2019
#Home_Switch_Aug_2019
0
All Replies
-
GS1200-8 supports Link Aggregation (LAG) static mode of 802.3ad.
https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=017506&lang=EN
https://kb.zyxel.com/KB/searchArticle!gwsViewDetail.action?articleOid=006008&lang=EN
0 -
Thank you for your prompt response. Which option should be installed on NAS storage for correct operation? Possible option: Broadcast, Balance-rr, Balance-xor.
0 -
Balance XOR: This mode balances the network traffic received and sent by your NAS, and requires Static Link Aggregation to be enabled on the switch(es).
I think it is Balance XOR, but you may need to contact QNAP Technical support for the confirmation about which "Port Trunking Mode" need to select on QNAP D4.
0 -
QNAP Technical support answered me: Network storage (QNAP D4) uses only 802.3 ad LACP. Link Aggregation (LAG) static mode not supported. Very sorry, I was hoping to merge the ports on the GS1200-8 with my NAS. For these purposes, bought Zyxel.
0 -
As far as I know, Zyxel GS1900 series can support LACP.1
Ally Member
Categories
- 6.8K All Categories
- 1.4K Nebula
- 29 Nebula Ideas
- 38 Nebula Status and Incidents
- 3.9K Security
- 200 Security Ideas
- 723 Switch
- 30 Switch Ideas
- 601 WirelessLAN
- 8 WLAN Ideas
- 4.5K Consumer Product
- 98 Service & License
- 214 New and Release
- 38 Security Advisories
- 513 FAQ
- 236 Nebula FAQ
- 117 Security FAQ
- 74 Switch FAQ
- 65 WirelessLAN FAQ
- 5 Consumer Product FAQ
- Documents
- 30 Nebula Monthly Express
- 43 About Community
- 31 Security Highlight
Consumer Product Help Center
FAQ