Removed 2 HDD´s can´t access them anymore - NAS542
McPervert
Posts: 1
So basically i removed two hdd´s while the NAS was shut down.
I plugged the disks back in but now i can´t access the data anymore. I can see the volumes in the storage manager but the only thing i can do is to create a new volume.
Before i removed them they were just used as network storage, but tbh i can´t tell anymore if i used them as "basic" drives or if i put them in raid.
Anyone got a clue?
#NAS_Oct_2019
I plugged the disks back in but now i can´t access the data anymore. I can see the volumes in the storage manager but the only thing i can do is to create a new volume.
Before i removed them they were just used as network storage, but tbh i can´t tell anymore if i used them as "basic" drives or if i put them in raid.
Anyone got a clue?
#NAS_Oct_2019
0
Accepted Solution
-
You can see the volumes? In that case the volumes are assembled. Have a look in the shares menu if you have to re-enable the shares on that volumes.
0
All Replies
-
You can see the volumes? In that case the volumes are assembled. Have a look in the shares menu if you have to re-enable the shares on that volumes.
0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 115 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 64 Switch Ideas
- 900 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 832 Nebula FAQ
- 402 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight