Multy X and DHCP management

Ashenshugar · November 2019

I would like to purchase a couple of Multy X mesh Wi-Fi units to upgrade my existing WiFi network.
I have numerous devices on my network which I have assigned static IP addresses and I need them to be assigned the same IP address on the new network, therefore I have a couple of questions:

Can in the DHCP assigned IP range for the internal network be completely specified, ie 192.168.1.X rather than the default 192.168.212.X?
When reserving an IP address for a device on the network can the entire IP address be defined for the reservation, rather than just selecting the current dynamically assigned IP address.

Thanks

#MultyX_Nov_2019

Hanamichi · November 2019

From your requirements, I think Multy Plus would be better than Multy X to fit your needs.
1. Customization an IP address for the internal network:
https://homeforum.zyxel.com/discussion/1463/how-to-change-multy-plus-wsq60-ip-address-via-web-gui#latest
2. Definition an IP address for a device:
https://homeforum.zyxel.com/discussion/1448/how-to-set-up-a-static-ip-address-for-a-client-device-via-web-gui#latest
Multy X does not supported above features and it only can use Multy App to configure the setting. Multy Plus supports Multy App and web interface (Advanced Settings for Customization).

Ashenshugar · November 2019

Looking through the forum and support pages it appears that the Multy+ will provide the functionality I need along with a much better web GUI for setup. Can anyone confirm this is correct?

Multy X and DHCP management

Accepted Solution

All Replies

Categories

Consumer Product Help Center