[NEBULA] Is it possible to create Virtual WAN port

LarrY_FIN
LarrY_FIN Posts: 3  Freshman Member
Fifth Anniversary Nebula Gratitude
edited April 2021 in Nebula
Hi!
Our customer has multiple public IP-addresses, is it somehow possible to create virtual wan port for those, same like as USG series? If not, is the feature coming in near future?

Accepted Solution

All Replies

  • FrankIversen
    FrankIversen Posts: 92  Ally Member
    Third Anniversary Ideas master Friend Collector First Comment
    Does this mean we can't create a virtual lan adapter as a gateway for dmz?
  • Zyxel_CSO
    Zyxel_CSO Posts: 416  Zyxel Employee
    Seventh Anniversary 100 Comments 5 Answers Friend Collector
    edited June 2017
    @FrankIversen

    NSG does not support the establishment of virtual lan adapter for dmz at present. We are still under evaluation of the virtual interface and will get back to you as long as the feature is confirmed in our future roadmap.
  • FrankIversen
    FrankIversen Posts: 92  Ally Member
    Third Anniversary Ideas master Friend Collector First Comment
    we have 2 public wan ips. we want the it-department to run internally on LAN2 and use 1 specific wan ip for outbound traffic (due to some dashboards around which only accepts communication from our public ip).
    the other
  • Zyxel_Barney
    Zyxel_Barney Posts: 84  Zyxel Employee
    Zyxel Certified Network Engineer Vertical - Education Zyxel Certified Network Engineer Vertical - MSP Zyxel Certified Network Engineer Vertical - HORECA Zyxel Certified Network Engineer Vertical - Elite
    edited March 2018
    @FrankIversen

    This application requires Nebula CC to support both Virtual interfaces and Policy Routing.
    Policy Routes will be introduced to Nebula on Phase 4, scheduled to release on the 2nd half of 2018.
    Unfortunately, there has been no plans yet to support virtual interfaces on the NSG. I will create this request under our Ideas section. With enough likes, perhaps we can add this in to our road map faster!

    Regards,
    Barney
  • CommsCo
    CommsCo Posts: 22  Freshman Member
    Third Anniversary First Comment
    Has this now been implemented?

    If so, any help documents for it?

    Many thanks

    Richard
  • Zyxel_Chris
    Zyxel_Chris Posts: 705  Zyxel Employee
    Zyxel Certified Network Administrator - WLAN Sixth Anniversary 500 Comments 50 Answers
    edited January 2019
    Hello @CommsCo
    About policy route, yes it has been implemented on September :), for the WAN virtual interface it's in our roadmap already but we're still working on this I can't give you a precise schedule in this moment, please stay tuned.

    /Chris
  • Azzie
    Azzie Posts: 2  Freshman Member
    Friend Collector First Comment
    edited April 2020

    Hello @Nebula_Chris

    has the Virtual IP been implemented? I am facing the same situation as Larry_FIN. I need to use multiple public IPs on a single WAN port of a NSG200

    Many thanks

  • Zyxel_Chris
    Zyxel_Chris Posts: 705  Zyxel Employee
    Zyxel Certified Network Administrator - WLAN Sixth Anniversary 500 Comments 50 Answers

    Hi @Azzie

    Welcome to the Nebula community!!☺️

    May I know if you're planing to use it on virtual server? If it is the case then please refer to the below screenshot, you can still put IP in Public IP column, which can get same result as virtual interface.

    image.png


  • Azzie
    Azzie Posts: 2  Freshman Member
    Friend Collector First Comment

    Hello @Nebula_Chris ,

    I've tested it and it seems to work, many thanks for the info!

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）