NAS 540 3TB unable to create volume
skynet2001
Posts: 8 
Freshman Member
Freshman Member
Who can help 
Seagate 3TB is visible in internal disks , but no volume can be created
Seagate 3TB is visible in internal disks , but no volume can be created
0
All Replies
-
Maybe the file system of the HDD is incorrect? is it NTFS / EXT4 / FAT32?0
-
Did you go to Storage Manager > Internal Storage > Volume create to create volume like the attached pic below?
0 -
Yes i tried but without any luck, volume is not created0
-
HD was from other NAS drive
0 -
0 -
after apply the volume is not saved0
-
You can try re-format the disk on other device.
It should be applied in Linux file system format like EXT4.
https://kwilson.io/blog/format-a-linux-disk-as-ext4-from-the-command-line/
0 -
@skynet2001, You have what I had from another NAS. What you need to do is use third-party partition software to get rid of the partition first. Like GParted or something similar software. I have gone through wiping at least 2 hard drives in 2 weeks for my NAS326 (one from my old NAS and one from my old iMac)0
-
-
It is not possible to attach HD to another device
0
Ally Member
Categories
- All Categories
- 164 Beta Program
- 1.7K Nebula
- 86 Nebula Ideas
- 62 Nebula Status and Incidents
- 4.7K Security
- 236 Security Ideas
- 1.1K Switch
- 50 Switch Ideas
- 908 WirelessLAN
- 27 WLAN Ideas
- 5.3K Consumer Product
- 172 Service & License
- 294 News and Release
- 65 Security Advisories
- 14 Education Center
- 911 FAQ
- 399 Nebula FAQ
- 249 Security FAQ
- 90 Switch FAQ
- 100 WirelessLAN FAQ
- 18 Consumer Product FAQ
- 55 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 68 About Community
- 51 Security Highlight
Consumer Product Help Center
FAQ