NAS 540 3TB unable to create volume
Options
skynet2001
Posts: 10
Freshman Member
Freshman Member
Who can help 
Seagate 3TB is visible in internal disks , but no volume can be created
Seagate 3TB is visible in internal disks , but no volume can be created
0
All Replies
-
Maybe the file system of the HDD is incorrect? is it NTFS / EXT4 / FAT32?0
-
Did you go to Storage Manager > Internal Storage > Volume create to create volume like the attached pic below?

0 -
Yes i tried but without any luck, volume is not created0
-
HD was from other NAS drive
0 -

0 -
after apply the volume is not saved0
-
You can try re-format the disk on other device.
It should be applied in Linux file system format like EXT4.
https://kwilson.io/blog/format-a-linux-disk-as-ext4-from-the-command-line/
0 -
@skynet2001, You have what I had from another NAS. What you need to do is use third-party partition software to get rid of the partition first. Like GParted or something similar software. I have gone through wiping at least 2 hard drives in 2 weeks for my NAS326 (one from my old NAS and one from my old iMac)0
-
-
It is not possible to attach HD to another device
0
Categories
- All Categories
- 442 Beta Program
- 3K Nebula
- 234 Nebula Ideas
- 6.7K Security
- 692 USG FLEX H Series
- 365 Security Ideas
- 1.8K Switch
- 87 Switch Ideas
- 1.4K Wireless
- 56 Wireless Ideas
- 7.1K Consumer Product
- 312 Service & License
- 508 News and Release
- 97 Security Advisories
- 31 Education Center
- 10 [Campaign] Zyxel Network Detective
- 5.1K FAQ
- 34 Documents
- 89 About Community
- 114 Security Highlight
Ally Member