NSA325 v2 - Error Message "Disk full" - but on HDD´s enough space

Marco78
Marco78 Posts: 2  Freshman Member
Hello,

on my NSA325 v2 i had some Problems... It runs fine for the last 1 1/2 years, but now it have some strange behaviors. They are 2 HDD´s installed (8TB und 2TB). On my 1. HD are 30gb free of 2Tb and on my 2. HD are 200gb free of 8TB, but i cant copy more files on the second HD. The NAS stops copying without any Message..disconnect some Minutes and ist ready again.
No Recycline Bin is activated.

If i log into the User Web Menu. it Popup a Message: Disk is Full...

Why is this happend? I checked both Hdd´s without any errors. I reset the NAS with the Resetbutton, but the Disk Full Message are the same.

Any suggestions?
Thx

Marco

All Replies

  • Marco78
    Marco78 Posts: 2  Freshman Member
    Here some Screenshots


    Note: I backuped my 8TB and format it, but same Message:


  • Mijzelf
    Mijzelf Posts: 2,598  Guru Member
    First Anniversary 10 Comments Friend Collector First Answer
    The message is clear. One of the disks is full.
    on my 2. HD are 200gb free of 8TB, but i cant copy more files on the second HD.
    Someone in this forum had the problem that the free space on one of his disks was shown for the other. I can't remember if that was only cosmetical, or if it had serious impact.
    You could try to pull the first disk, to see if you then can write to the other.

Consumer Product Help Center