Led description of NWA1123-AC-HD
edited April 14
The led description in the manuals is not complete. The led can also switch between Green and Yellow, no not Amber. This happens when the connection to NCC is lost.
Please add this to the manual.
Are you perhaps referring to the NWA1123-AC HD's User guide?
If so, you are correct that some LED behavior are missing or not explained well.
You can refer to our Nebula Device Startup LED Guide under
NCC > HELP > Online documentation
for the latest updated LED behavior.
Blinking Amber (or yellow) and Green refers to the AP is still in boot up process.
Hope this helps!
As Barney said, the user guide might not be so easy to interpret but the behavior you mentioned is described as:
Regarding the yellow/amber issue, there are some discrepancies for the LED component of this model, so if you compare to other devices, the LED looks more yellowish. However, for practicality, we use "Amber" to identify the similar color across all the devices, sorry for the confusion.
Hello, I have an issue, my NWA212AX - light goes from green to yellow (1s green 1s yellow). I see the wifi, but cant connect.
When the light shows blinking amber and green, it means the AP is booting up, so the connection of the wireless is not stable since it's still in booting process. And then, it would be blinking amber to set the connection with NCC. After it connects to the NCC and syncs the configuration, you will see the AP configuration status is "up to date", and the SSIDs of the AP is available to connect.
Here's the LED status table for your reference.
It looks like you're new here. If you want to get involved, click on this button!
Nebula Status and Incidents
Service & License
New Firmware Release
Zyxel Help Center