NWA210AX - How access web interface???
I just purchased my first Zyxel product, NWA210AX to see if I like it compared to the UniFi stuff. I plugged it into my switch and it connected to the net. I was able to connect to it via the Android Nebula app but when I type it's IP and try to login via a browser on the LAN the default user/pass of admin/1234 doesn't work. Is that the default info to get in to make configuration changes? TIA
0
Accepted Solution
-
Dear @though,
Welcome to Zyxel Community!
Once you have added the AP onto your Nebula Org/Site, the AP will be managed via Nebula, and the password of AP will be set to the one from Nebula Control Center > Site-wide > General settings > Local credentials > Password.
When an AP is managed by Nebula, most of the AP settings can only be configured via Nebula, it only has few options in the local GUI, like:
Here’s the URL to login to Nebula web version:
https://nebula.zyxel.com/
After logging in with your Nebula Username/password (same as Nebula App version), you should be able to see the Access Point column, then you can click it to configure your NWA210AX.
For more details, you may visit our FAQ pages.
https://community.zyxel.com/en/categories/nebula-nebula-access-point
For example, to check the AP status, you can read this article to get the detailed information:
https://community.zyxel.com/en/discussion/10343/nebula-how-to-check-the-ap-status-on-ncc#latest
Please let us know if any further question.
Regards,
Nathan
0
All Replies
-
Dear @though,
Welcome to Zyxel Community!
Once you have added the AP onto your Nebula Org/Site, the AP will be managed via Nebula, and the password of AP will be set to the one from Nebula Control Center > Site-wide > General settings > Local credentials > Password.
When an AP is managed by Nebula, most of the AP settings can only be configured via Nebula, it only has few options in the local GUI, like:
Here’s the URL to login to Nebula web version:
https://nebula.zyxel.com/
After logging in with your Nebula Username/password (same as Nebula App version), you should be able to see the Access Point column, then you can click it to configure your NWA210AX.
For more details, you may visit our FAQ pages.
https://community.zyxel.com/en/categories/nebula-nebula-access-point
For example, to check the AP status, you can read this article to get the detailed information:
https://community.zyxel.com/en/discussion/10343/nebula-how-to-check-the-ap-status-on-ncc#latest
Please let us know if any further question.
Regards,
Nathan
0
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight