LTE5398-M904 - ZySH command to reboot LTE connection

Options
acastelli
acastelli Posts: 3
edited January 2024 in Mobile Broadband
Hi,
i have a LTE5398-M904 router. My telephone operator schedules an IP change every 4 hours which consists of a disconnection of about 12 seconds, enough to disconnect from the vpn or from a call conference.

I would like to understand if there is a way to force the reconnection of the LTE network to avoid being disconnected at particular times of the day. The idea would be to run a script that connects in ssh and (for example) selects an unavailable band in my BTS or disable and re-enable wwan0.
I have not found documentation on ZySH commands. Can someone help me?
Thank you

Accepted Solution

  • Zyxel_CPE
    Zyxel_CPE Posts: 30  Freshman Member
    5 Answers First Comment Third Anniversary
    Answer ✓
    Hi acastelli , you may use ZySH command to set manual APN or auto APN to re-connect LTE WAN. I hope it will help you.

All Replies

  • Zyxel_CPE
    Zyxel_CPE Posts: 30  Freshman Member
    5 Answers First Comment Third Anniversary
    Answer ✓
    Hi acastelli , you may use ZySH command to set manual APN or auto APN to re-connect LTE WAN. I hope it will help you.

  • fabriba
    fabriba Posts: 18  Freshman Member
    First Comment Friend Collector
    Hi @acastelli, 
    I am experiencing something similar, did you ever work out a solution?
  • fabriba
    fabriba Posts: 18  Freshman Member
    First Comment Friend Collector
    @Zyxel_CPE could you please send me instructions on how to ssh into the router?
    I am using:
    ssh admin@192.168.1.1

    I tried password 1234 and my http login's password, but neither is working
  • fabriba
    fabriba Posts: 18  Freshman Member
    First Comment Friend Collector
    for anyone bumping into this: firmware upgrade did the trick

Categories

Consumer Product Help Center

EnglishTiếng ViệtРусскийไทย中文（台灣）