USG110 Shutdown/Restart
jeffjohn1941
Posts: 71 
Ally Member
Ally Member
I see that it is strongly recommended to use the Maintenance -> Shutdown procedure before disconnecting power.
Basic question: How will it 'reopen'? Does the button change or is it automatic with Logon?
#Biz_Aug_2019
Basic question: How will it 'reopen'? Does the button change or is it automatic with Logon?
#Biz_Aug_2019
Jeff J Purcell, New Forest, Uk and France, 44290
0
Accepted Solution
-
"Reopen" what??To restart the device? If so, you can plug in the power cord directly.0
Master Member
All Replies
-
"Reopen" what??To restart the device? If so, you can plug in the power cord directly.0
-
How to tell when shutdown is complete?0
-
After "SYS" LED stop flashing, then system is rebooted completely
0 -
Rebooted? I was asking about a shutdown.I have another model, but I think it should be the same.I go in menu, click for shutdown, and wait until... what?After some second it stops answering to ping, and at that point web interface cannot give feedback anymore.There is a counter on the page, but it goes on forever.0
-
After submitting shutdown requirement, the physical link will down in 10 seconds.
And all of services stop working even sys LED still up.0 -
I see that ethernet leds go off.Thanks.0
-
I have same problem, when I do a "shutdown", the application is not stopped.
- https://community.zyxel.com/en/discussion/12110/shutdown-function-on-devices-with-4-65-4-70-do-not-work#latest
0
Freshman Member
Categories
- All Categories
- 415 Beta Program
- 2.4K Nebula
- 146 Nebula Ideas
- 96 Nebula Status and Incidents
- 5.7K Security
- 262 USG FLEX H Series
- 271 Security Ideas
- 1.4K Switch
- 74 Switch Ideas
- 1.1K Wireless
- 40 Wireless Ideas
- 6.4K Consumer Product
- 249 Service & License
- 387 News and Release
- 84 Security Advisories
- 29 Education Center
- 10 [Campaign] Zyxel Network Detective
- 3.5K FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 85 About Community
- 73 Security Highlight
