2 WAX510 building Mesh Network

Options
Wolfgang
Wolfgang Posts: 39 image  Freshman Member
First Comment Third Anniversary
in Nebula
Hallo,
i have successfully build a Mesh network with 2 WAX510.
The question is where to see the information in Nebula how they are connected.
Is there an easy way to see this information, which band is used and other stuff?
Thx
Wolfgang

Accepted Solution

  • Zyxel_HsinBo
    Zyxel_HsinBo Posts: 513 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - WLAN Zyxel Certified Network Administrator - Switch
    edited May 2022 Answer ✓

    Hi, @Wolfgang

     

    Thanks for consulting Nebula support!

    According to your description, 

    If you have our Pro-pack license, you can see the topology of your network from the below path, which includes how the root AP and the repeater AP connect together.

     

    PATH: Site-wide >> Monitor >> topology

       

     

    If you are a base pack user, you may not see the topology but you can still check your root AP and repeater AP info from the path below

    PATH: Access point >> Monitor >> Access point

     

    Root AP (Green Solid icon)

    Repeater AP (Green Hollow icon) 

    There would be AP information for your requirement from the path (Access point >> Monitor >> Access point), you can see more detailed information by clicking the AP from the AP list.

       

    Hope the answer would solve your problem.

    Have a nice day, Thank you!

     

    Best Regards,

     

    HsinBo

    Zyxel_HsinBo

    Untitled Image

All Replies

  • Zyxel_HsinBo
    Zyxel_HsinBo Posts: 513 image  Zyxel Employee
    Zyxel Certified Network Engineer Level 2 - Switch Zyxel Certified Network Engineer Level 1 - Switch Zyxel Certified Network Administrator - WLAN Zyxel Certified Network Administrator - Switch
    edited May 2022 Answer ✓

    Hi, @Wolfgang

     

    Thanks for consulting Nebula support!

    According to your description, 

    If you have our Pro-pack license, you can see the topology of your network from the below path, which includes how the root AP and the repeater AP connect together.

     

    PATH: Site-wide >> Monitor >> topology

       

     

    If you are a base pack user, you may not see the topology but you can still check your root AP and repeater AP info from the path below

    PATH: Access point >> Monitor >> Access point

     

    Root AP (Green Solid icon)

    Repeater AP (Green Hollow icon) 

    There would be AP information for your requirement from the path (Access point >> Monitor >> Access point), you can see more detailed information by clicking the AP from the AP list.

       

    Hope the answer would solve your problem.

    Have a nice day, Thank you!

     

    Best Regards,

     

    HsinBo

    Zyxel_HsinBo

    Untitled Image

Categories

Nebula Tips & Tricks


    Read more

    Nebula Help Center

    EnglishTiếng ViệtРусскийไทย中文（台灣）