LTE5398-M904 - ZySH command to reboot LTE connection

Posts: 3
edited January 2024 in Mobile Broadband
Hi,
i have a LTE5398-M904 router. My telephone operator schedules an IP change every 4 hours which consists of a disconnection of about 12 seconds, enough to disconnect from the vpn or from a call conference.

I would like to understand if there is a way to force the reconnection of the LTE network to avoid being disconnected at particular times of the day. The idea would be to run a script that connects in ssh and (for example) selects an unavailable band in my BTS or disable and re-enable wwan0.
I have not found documentation on ZySH commands. Can someone help me?
Thank you

Welcome!

It looks like you're new here. If you want to get involved, click on this button!

Accepted Solution

  • Posts: 30  Freshman Member
    5 Answers First Comment Third Anniversary
    Answer ✓
    Hi acastelli , you may use ZySH command to set manual APN or auto APN to re-connect LTE WAN. I hope it will help you.

All Replies

  • Posts: 30  Freshman Member
    5 Answers First Comment Third Anniversary
    Answer ✓
    Hi acastelli , you may use ZySH command to set manual APN or auto APN to re-connect LTE WAN. I hope it will help you.

  • Posts: 18  Freshman Member
    First Comment Friend Collector
    Hi @acastelli
    I am experiencing something similar, did you ever work out a solution?
  • Posts: 18  Freshman Member
    First Comment Friend Collector
    @Zyxel_CPE could you please send me instructions on how to ssh into the router?
    I am using:
    ssh admin@192.168.1.1

    I tried password 1234 and my http login's password, but neither is working
  • Posts: 18  Freshman Member
    First Comment Friend Collector
    for anyone bumping into this: firmware upgrade did the trick

Welcome!

It looks like you're new here. If you want to get involved, click on this button!

Welcome!

It looks like you're new here. If you want to get involved, click on this button!

Consumer Product Help Center