DHCP-Relay on XGS1930-52HP
All Replies
-
Hi @Arvee,
DHCP Relay is a standalone mode feature currently.
Could you share your scenario of why you need this feature in Nebula?
Zyxel Melen
0 -
Hi Melen,
I'm replacing an older HP Procurve switch that was doing very simple routing duties with static routes and VLAN for a VoIP install.
The DHCP server for the data and voice subnets is on the phone controller (Mitel) on the Voice VLAN and subnet as that was the reccomendation of the phone people. Due to the DHCP options the Mitel phones need to boot.
We did try a Windows DHCP server on the data subnet instead many years ago and it was prone to failure with the Mitel phones as the phone guy warned, so DHCP duties were moved to the phone controller.
I do have the switch in standalone mode (and it is working very well), but would like Nebula as the office this switch is physically located is over 4 hours from the home office.
0 -
Categories
- All Categories
- 347 Beta Program
- 2.1K Nebula
- 114 Nebula Ideas
- 77 Nebula Status and Incidents
- 5K Security
- 44 USG FLEX H Series
- 246 Security Ideas
- 1.2K Switch
- 65 Switch Ideas
- 901 WirelessLAN
- 33 WLAN Ideas
- 5.8K Consumer Product
- 204 Service & License
- 326 News and Release
- 71 Security Advisories
- 21 Education Center
- 5 [Campaign] Zyxel Network Detective
- 1.8K FAQ
- 831 Nebula FAQ
- 401 Security FAQ
- 219 Switch FAQ
- 190 WirelessLAN FAQ
- 45 Consumer Product FAQ
- 136 Service & License FAQ
- 34 Documents
- 34 Nebula Monthly Express
- 71 About Community
- 61 Security Highlight